iMac (27-inch, Mid 2010) Take Apart — Rear Housing 269
2010-09-09
9 Transfer Camera and
Reuse Thermal Paste:
Transfer camera from
old rear housing to
new rear housing and
reuse thermal paste
from old rear housing.
Use a black stick to
remove and reapply
thermal paste to
camera (circled).
Note: A syringe of
thermal paste is
available as needed,
part number 922-
9625, good for 5
applications.
Important: This white
thermal paste should
NOT be used for any
other purpose (such
as portable computer
heatsinks).
10 Apply aluminum
tape and foam
gasket:
Install aluminum tape
(#1) and foam gasket
(#2) as shown. .
Aluminum tape
placement continued
on next page.