Apple MD094LL/A manual Pairing the Magic Trackpad

Pairing the Magic Trackpad

To pair your trackpad:

1.Choose Apple () > System Preferences, and then click Trackpad.

2.Click “Set Up Bluetooth Trackpad …” in the lower-right corner.

3.Press the On/off button on your trackpad to turn it on.

4.Click Continue when your trackpad is detected.

Once your trackpad is paired with your Mac, use Software Update again to make sure you have the latest software installed.

Note: If the iMac (27-inch, Mid 2010) needs to have system software reinstalled for some reason, pair the Magic Trackpad and then run Software Update. If for some reason you notice that only basic functionality is present on the Magic Trackpad, ensure that it’s paired correctly before launching Software Update.

Installing Batteries

1.Use a coin to remove the battery compartment cover on the left side.

2.Insert batteries into the battery compartment as shown.

Warning: Replace or recharge batteries at the same time. Don’t mix old batteries with new batteries and don’t mix battery types (for example, alkaline and lithium batteries). Don’t open or puncture the batteries, install them backwards, or expose them to fire, high temperatures, or water. Don’t charge nonrechargeable AA batteries. Keep batteries out of the reach of children.

2010-09-09 iMac (27-inch, Mid 2010) Basics — Overview  17