Hearth and Home Technologies BIR50-B Listing and Code Approvals, Appliance Certification

Page 6

1Listing and Code Approvals

A. Appliance Certification

This fireplace system has been tested and listed in accor- dance with UL 127 standards by Underwriters Laboratories Inc. for installation and operation in the United States.

This fireplace may be installed in sleeping rooms EXCEPT in manufactured homes. If installed with a gas log set, pro- visions for the National Fuel Gas Code must be met.

This fireplace has been tested and listed for use with the optional components specified in this manual. These optional components may be purchased separately and in- stalled at a later date. The outside air kits must be installed at the time of fireplace installation.

Heatilator is a registered trademark of Hearth & Home Technologies Inc.

Warning! Risk of Fire! Hearth & Home Technologies disclaims any responsibility for, and the warranty and agency listing will be voided by the above actions.

DO NOT:

install or operate damaged fireplace

modify fireplace

install other than as instructed by Hearth & Home Technologies

operate the fireplace without fully assembling all components

overfire

install an unvented gas log set

install any component not approved by Hearth & Home Technologies

install parts or components not Listed or approved

Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage.

For assistance or additional information, consult a qualified installer, service agency or your dealer.

Notice: This fireplace is tested and approved as a decorative fireplace. It should not be factored as a primary heat source in residential heating calculations.

B. Non-combustible Materials

Materials which will not ignite and burn, composed of any combination of the following:

-

Steel

-

Iron

-

Brick

-

Tile

-

Concrete

-

Slate

-

Glass

-

Plasters

Materials reported as passing ASTM E 136, Standard

Test Method for Behavior of Metals, in a Vertical Tube Furnace at 750° C

C. Combustible Materials

Materials made of or surfaced with any of the following materials:

-

Wood

-

Compressed paper

-

Plant fibers

-

Plastic

Any material that can ignite and burn; flame proofed or not, plastered or un-plastered

6

Heatilator • Birmingham BIR50-B4059-682C • 8/12

Image 6
Contents Hot screen/mesh and glass doors will cause burns Fire RiskNumber Listing Label Information/LocationGrate Heatilator Birmingham BIR50-B 4059-682C 8/12Table of Contents Installer GuideUser Guide Warranty Limited Lifetime WarrantyWarranty Conditions Non-combustible Materials Listing and Code ApprovalsAppliance Certification Combustible MaterialsOperating Instructions Your FireplaceGrate Seasoned WoodStarting a Fire FirescreenOptional Components Glass DoorsVented Gas Log Sets & Gas Log Lighters Clear SpaceWood Fuel Hardwood vs SoftwoodMaintainance and Service Chimney Inspection/CleaningDisposal of Ashes Inspect Grate Glass CleaningCheck Firebox Molded Brick Panel Frequency As desiredTroubleshooting Guide Start Fire Problems Possible Cause SolutionGetting Started Typical Fireplace SystemDesign and Installation Considerations DraftNegative Pressure Locating your Fireplace & Chimney WindwardTools and Supplies Needed Inspect Fireplace and Components Typical Fireplace ComponentsFraming & Clearances Select Fireplace LocationModel # Clearances Air Space ClearancesSidewalls/Surrounds Frame the FireplacePosition the Fireplace Installation of FireplaceThings to Consider Place Protective Metal Hearth StripsInstall Outside Air Kit YESChimney Assembly Chimney RequirementsEffective Frame Openings Installation NotesInstall Firestop Cut Roof OpeningUsing Offsets/Returns Assemble Chimney SectionsOffset Elbow Installation Supplementary Support & StabilizerInstall Attic Insulation Shield Install Roof Radiation ShieldsAttach Flashing Field-Constructed Chase Top Flashing Finish Top Chimney Termination Requirements Flat RoofsChase Installations Construct the ChaseShrouds Shroud RequirementsHouse Style Shroud Minimum Dimensions House Style ShroudArch / Mailbox Style Shroud Pyramid Style ShroudInstall Back Molded Brick Panel-Traditional Installation of Molded Brick PanelInstall Hearth Molded Brick Panel Install Side Molded Brick Panel-TraditionalInstall Back Molded Brick Panel-Herring- bone Install Side Molded Brick Panel-Herring- boneInstall Screens Install Mortar OptionalFinishing Hearth Extension= 1/k x inches of thickness Raised Hearth Extension Framing Finishing Material Decorative FacingCombustible Mantel StandoffsFlush Front Wood Burning Inserts AccessoriesGas Log/Lighter Provision Gas Code, Ansi Z223.1Fireplace Dimensions Reference MaterialsChimney Components Required/shipped separatelyAt Depot Service PartsStocked 50 in. Woodburning FireplaceTraditional Refractory Traditional RefractoryHerringbone Refractory This page intentionally left blank Contact Information

BIR50-B specifications

The Hearth and Home Technologies BIR50-B is a sophisticated and innovative fireplace insert that has made significant strides in enhancing home heating and ambiance. As a leading product in the market, this model combines advanced technology with aesthetic elegance, making it a perfect choice for homeowners looking to upgrade their living spaces.

One of the standout features of the BIR50-B is its impressive thermal efficiency. The unit is engineered to deliver high heat output while minimizing fuel consumption. This efficiency is partly due to its advanced combustion system, which maximizes heat while reducing emissions, making it an environmentally friendly choice for consumers concerned about their carbon footprint.

The insert's design is another significant aspect that sets it apart. Its sleek and modern aesthetic, complemented by a large viewing area, allows for an unobstructed view of the flames. This not only provides a mesmerizing visual experience but also adds a cozy atmosphere to any room. The clean, stylish lines of the BIR50-B make it suitable for a wide variety of home décor styles, blending seamlessly with both contemporary and traditional interiors.

In terms of functionality, the BIR50-B is equipped with user-friendly control options. The intuitive interface allows homeowners to adjust heat levels and flame settings with ease. Additionally, the insert has an integrated blower system that effectively circulates warm air throughout the space, ensuring consistent heating regardless of room size.

Durability is also a key characteristic of the BIR50-B. Constructed from high-quality materials, it is built to withstand the test of time, ensuring that it remains a reliable source of warmth and comfort for years to come. The product comes with a comprehensive warranty, reflecting the manufacturer's confidence in its long-term performance.

Installation is made convenient with the BIR50-B, as it is designed to fit into existing fireplaces, eliminating the need for extensive renovations. This feature makes it an attractive option for homeowners looking for an efficient upgrade without the hassle of a complete overhaul.

In summary, the Hearth and Home Technologies BIR50-B fireplace insert is an exceptional choice for those seeking an efficient, stylish, and durable heating solution. With its impressive thermal efficiency, modern design, user-friendly controls, and ease of installation, it stands out as a premier option for enhancing any living space. Whether for supplemental heating or as a primary heat source, the BIR50-B delivers both performance and aesthetic appeal, making it a valuable addition to any home.