Sears L0711256 To Remove Belt, Push, Turn, Screws, Qlck cover forward Re/ease from back until

Page 14

Always follow all safety precautions when cleaning and servicing the POWER-MATE TM.

Electrical Shock Or Personal Injury

Hazard

Disconnect electrical supply before servicing or cleaning the unit. Failure to do so could result in elec- trical shock or personal injury from cleaner suddenly starting.

1.Remove light

cover by pressing in and lifting both sides as shown.

Push In		_	2. Push in and turn
And Turn		r_	bulb counterclock-
	_		wise to remove.				bulb.
			3. Replace		the
_"%	_		Bulb must		not	be
			higher	than	15 Watts.
	_---_'_		Close	light	cover until
			it snaps in place.

NOTE: See PARTS AND FEATURES for Bulb #.

Disconnect cleaner from electrical outlet. Check and remove hair, string and lint build- up frequently in the POWER-MATE TM brush and brush support areas. If build-up becomes excessive, disconnect POWER- MATE TM from wand and follow the steps below. Instructions can also be found under the light cover.

TO REMOVE BELT:

1. Remove light

cover and light bulb as shown

under LIGHT

BULB

CHANGING.

2. Unscrew the

POWER-

MATE TM cover

screws.

3.Turn

POWER-

MATE TM over.

To remove

cover, insert screwdriver at cover tabs on both sides and twist to release tabs.

4. Turn POWER- MATE TM right side up. Press handle release

pedal and lower the swivel. Tilt

Q_lck cover forward

Re/ease from back until

front snaps free.

14

Image 14

Contents Vacuum Cleaner Full ONE-YEAR Warranty SEARS, Roebuck and CO., D/817 WA, Hoffman Estates, ILDo not use cleaner without dust bag and/or Do not operate the cleaner with a puncturedIng or cleaning out brush area. Faiture to do Do not use the cleaner to pick up sharp hardSomaModels Power CordPile Height Indicator Pile Height PedalSerial Numbers On Bottom Cord Rewind BarCanister ModeY To remove Disconnect cord and step on Mate TMSnaps into place, Turn wand button Wand until Open the canister hoodInto SnapsHOW to Start WaySuggestedsweepingpattern Attachments on Wands On Handle PowerCrevice Tool Fabric Brush Floor Brush Powermatet DustingTroubleshooting Edge CleanerCanister Performance Indicator Overload ProtectorOutlet before BAG ChangingFor .,@ Raise red bagDo not USE Attachments if They are WET Dark Foam FilterWhite Electrostatic Filter Turn To Remove BeltPush ScrewsRemove worn To Replace BeltBrush Support Cover BaseTo Check Brush To Replace BrushPOWER-MATETM Call 24 hours a day, 7 days a week 800469-4663Sears SEARS, Roebuckand CO., DI817 WA, Hoffman Estates, IL SeguridadGarantia Completa POR UN ANO Elctrico.Paradesconectarla,hale en enchufe, no el cord6n No coloqueobjetosen lasaberturasAlgunosmodelos SuperiorTubo Cublertade la bombllla Algunosmodelos Parte InferiorAlmacenamlento para accesorlos Tapadel recepMculo Ceplllopara Sacudlr --L Telas CepllloparaCepUlopara Cord6n elctrlcoGlratorlo Pedal de Ilberac/6n Bot6 Glratorlo del mango DlsposlUva Sujetador / del cord6nDlsposltlvo BobSnde Bot6n delMango Ilberacl6nSelecci6n Para ComenzarIo de la alfombra Pedal de liberaeibnMienda empujar la POWER-MATETMen direcci6n Antesde jalar el recep- ticutoPOWER-MATE TM POWER-MATETMIndicador DE Rendimiento DEL Receptaculo Tapay Almacenamiento Para POWER-MATETMLimpiador DE Orillas Protector Contra SobrecargasBoise del Cambio DE LA BolsaDispositivo Giratorio DE LA Manguera Levanteel montaje rojoEste filtro se tiene qua cambiarcuandoest sucio Filtro Oscuro DE Hule EspumaRetireel filtro de BIO DE LA BOM- Billa Para Retirar LA CorreaEmpuJehaole Del ceplllo Eel ceplllo Para Cambiar LA CorreaSoporte Bsrra de soporte Para Examinar EL CepilloPara Cambiar EL Cepillo De la baseEstd desconectada ARS