Operating Humidifier Controls, Humidity Control

Operating Humidifier Controls

Humidity Control:

This control adjusts the amount of humidity depending on user's needs. The humidifier will turn on and off as required to maintain level of humidity you select. (See Fig. 10) Medium setting is recommended but there are times when a low or high amount of humidity may be pre- ferred. For constant operation of humidifier. Constant On allows for the maximum amount of humidity to be evapo- rated into the air continuously.

IMPORTANT: Water damage may result if condensation starts to form on windows or walls. Humidity control set-

ting should be lowered until condensation no longer forms.

Air Flow Control:

The higher the air flow speed, the faster humidified air is released into_the air. Low speed is the quietest and is provided for conditions that may not require as high an evaporation rate. (See Fig. 10)

Fill Light

When unit has a small amount of water left in it, a red fill light will come on and unit will shut off. (See Fig. 10)

HU_lorr y CONTROL

KenmoPe []

QUIETCOMFORT

AIR FLOW CONTROL

MODEl_ 758.144120

Figure 10

HLIM[OfTY CONTROL

f, r_ ji ,,p.

Kenmore rJ_

QUIE] COMFORT

AIR FLOW CONTROL

vc_

r,, l

MODEL 758.144240

Using Your Humidifier

1.Be sure unit is plugged in, full of water and your splash guard is stored behind motor support section.

2.Set Air Flow Control knob to Low or number 1 position. (See Fig. 10)

3.Set Humidity Control to Medium position. (,See Fig. 11)

NOTE: Humidifier should operate with humidity control on the recommended Medium setting. If is does not, the humidity is at a relatively high level. To test the unit under this condition, turn Humidity Control all the way to Con- stant On and unit should begin to operate. After unit has been tested, set Humidity Control to Medium or desired level.

Allow 24 hours for humidifier to adjust.

If humidity level in home is sufficient, the humidifier will only operate with Humidity Control set on Constant On.

IMPORTANT: Water damage may result if condensation starts to form on windows or walls. Humidity Control set-

ting should be lowered until condensation no longer forms.

4.If humidifier stops running, the humidity level is at the normal requirements for that setting or it.is adjusting to the home conditions. Figure 11 shows approximate rel- ative humidity percentages which correspond to the various settings of the Humidity Control.

When Outdoor	Recommended Indoor
Temperature is:	Relative Humidity is
_IO°F	20%
O"F	25%
IO°F	30%
20°F & above	50%

30% TO 50%

FRelative

'_- ME_GH

_ LOW CONSTANTO_

Figure 11

758.144120, 758.144240 specifications

Sears offers a range of appliances that provide practical solutions for everyday needs. Among its most notable products are the models 758.144240 and 758.144120, designed to bring efficiency and convenience to modern households. These appliances reflect the qualities that have kept Sears at the forefront of the retail industry and have made them a trusted brand for generations.

One of the main features of the Sears 758.144240 and 758.144120 models is their energy efficiency. Both appliances are designed with advanced technologies that minimize power consumption while maximizing performance. Equipped with smart energy-saving modes, these models adjust their operations based on usage patterns, ensuring that energy is utilized efficiently, which ultimately lowers utility bills.

Another hallmark of these appliances is their user-friendly interface. The designs incorporate intuitive controls and digital displays that allow users to easily navigate between different settings and functions. This simplicity in use means that even those who may not be technologically savvy can operate the appliances efficiently without extensive training or troubleshooting.

In terms of design, the models boast a sleek and contemporary aesthetic that fits seamlessly into any kitchen or laundry room setting. They are crafted with durable materials that provide not only longevity but also a sense of style. The available color options allow for personalization and integration with existing decor, making these appliances as visually appealing as they are functional.

Sears models 758.144240 and 758.144120 also feature innovative technologies that enhance their overall performance. For instance, they may incorporate specialized washing or drying cycles tailored to different fabric types, ensuring optimal care for clothing. Additionally, some models might include sensors that automatically adjust cycles based on load size, further improving efficiency and user experience.

Moreover, these appliances are built with safety features designed to prevent accidents and ensure peace of mind during operation. Child locks, automatic shut-off mechanisms, and overheat protection are just a few examples of the thoughtful design elements aimed at safeguarding users.

In summary, the Sears 758.144240 and 758.144120 models encompass a wide array of features that prioritize energy efficiency, usability, aesthetic appeal, and advanced technology. These characteristics make them ideal choices for consumers looking to invest in reliable and stylish appliances that cater to the needs of modern living.