Cleaning of Humidifier Tank

WARNING: To avoid toxic injury, fire or damage to

humidifier, use only cleaners specially recom- mended for humidifiers. Never use flammable,

combustible or poisonous material to clean your humidifier. To avoid scalds and damage to humidi-

fier, never put hot water in humidifier.

CAUTION: Local water purity varies from area to area and under certain conditions water impurities and airborne bacteria may promote the growth of microorganisms in the reservoir of the humidifier.

To retard bacteria growth that may cause odors and be harmful to your health, use only Sears recommended filters. We also recommend using

32-149000 approved bacteriostat. Clean your humidifier regularly.

Care and Maintenance

To make cleaning easier, the tank should be completely dried out. Proceed as follows.

a. Loop switch actuato_ Fi_ngaround plastic hook located directly above the switch actuator.(Fig. 12)

b. Set humidity control to Constant On, air flow to High.

Run till tank is dry._

NOTE: With the switch actuator ring in place unit will con- tinue to run until the ring is released. Depending upon humidity levels, once the tank is empty the average dry out time is approximately 2 hours.

1.When unit is dry, release switch actuator ring and shut the unit off.

2.Unplug humidifier, and proceed to clean.

WARNING: If humidifier is not unplugged, fan could start after motor support is removed.

3.Raise lid to rest on hinges.

4.Lift out the motor support section and wipe off any mineral deposits with a clean cloth. (Fig. 13)

CAUTION: The switch actuator is a fragile part. Set

the motor support section down carefully to be sure the switch actuator does not become dam-

aged.

5.Before removing the filters, we recommend moving the humidifier to an area where floor coverings are not susceptible to water damage, i.e. kitchen or bath areas.

6.Slide up the filter holders and remove (either discard or store for further use) the filters located inside by gently pushing out from either side. Wash off mineral deposits on filter holder and wipe with a clean cloth.

7.Remove the floats from the bottom of the humidifier cabinet. The cabinet should be empty and the water

reservoir is ready for cleaning. (The water reservoir is the lower areas of the humidifier cabinet that the

floats and filter holders are located during the normal operation time.)

8.Proceed to "Bi-Weekly Maintenance" or "End of Sea- son Maintenance.

Figure 12

Figure 13

HOOK

ACTUATOR

RING

SWITCH

ACTUATOR

MOTOR

•SUPPORT SECTION

ACTUATOR

758.144120, 758.144240 specifications

Sears offers a range of appliances that provide practical solutions for everyday needs. Among its most notable products are the models 758.144240 and 758.144120, designed to bring efficiency and convenience to modern households. These appliances reflect the qualities that have kept Sears at the forefront of the retail industry and have made them a trusted brand for generations.

One of the main features of the Sears 758.144240 and 758.144120 models is their energy efficiency. Both appliances are designed with advanced technologies that minimize power consumption while maximizing performance. Equipped with smart energy-saving modes, these models adjust their operations based on usage patterns, ensuring that energy is utilized efficiently, which ultimately lowers utility bills.

Another hallmark of these appliances is their user-friendly interface. The designs incorporate intuitive controls and digital displays that allow users to easily navigate between different settings and functions. This simplicity in use means that even those who may not be technologically savvy can operate the appliances efficiently without extensive training or troubleshooting.

In terms of design, the models boast a sleek and contemporary aesthetic that fits seamlessly into any kitchen or laundry room setting. They are crafted with durable materials that provide not only longevity but also a sense of style. The available color options allow for personalization and integration with existing decor, making these appliances as visually appealing as they are functional.

Sears models 758.144240 and 758.144120 also feature innovative technologies that enhance their overall performance. For instance, they may incorporate specialized washing or drying cycles tailored to different fabric types, ensuring optimal care for clothing. Additionally, some models might include sensors that automatically adjust cycles based on load size, further improving efficiency and user experience.

Moreover, these appliances are built with safety features designed to prevent accidents and ensure peace of mind during operation. Child locks, automatic shut-off mechanisms, and overheat protection are just a few examples of the thoughtful design elements aimed at safeguarding users.

In summary, the Sears 758.144240 and 758.144120 models encompass a wide array of features that prioritize energy efficiency, usability, aesthetic appeal, and advanced technology. These characteristics make them ideal choices for consumers looking to invest in reliable and stylish appliances that cater to the needs of modern living.