Sears 635.83142 owner manual Operation, How the Air Cleaner Works

How the Air Cleaner Works

Four Stages to Cleaner, Fresher Air

The air cleaner fan circulates room air through tl_e unit's

Our different processing stages to help remove pollutants and household odors.

1= Large particles like hair and lint are trapped by the

(washable) Pre-Filter.

Getting Started

The air cleaner can be use(] in any room in the house or in any workspace. Be sure to place it so that air can freely circulate into the back grill and out through the front grill, The unit should never be placed on soft surfaces such as beds or sofas; near computers, radios or TV's; or near sources ot heat (such as stove tops or ovens). If placing the back grill against the wall, allow at least 6-8 inches clearance,

2.Smeller particles - dust, smoke, pollen, etc. - pass through the (washable) Electronic Filter where they receive an electrical charge.

3, The charged particles are attracted to a series of alternately charged aluminum plates, These particles remain in the Electronic Filter until removed by washing,

4.As the final step in the process, air then passes through a Charcoal Filter that helps remove household odors.

Carefully remove the unit from the protective carton and the plastic bag coveting the unit. Remove the Filter Access Cover. Using the filter handle, remove the Electronic Filter from the cabinet and remove the plastic bag covering the Charcoal Filter, Return the Charcoal Filter back in its original position in the Electronic Filter, Install the Electronic Filter in the air cleaner and replace the Filter Access Cover. Your air cleaner is now ready for operation, Plug it into a standard household electrical outlet. (For your conve- nience, there is a label on the bottom of the unit indicating electrical specifications and power consumption.)

f

SUPERCLE._

Charcoal

Filter

F_ont Grill

Operation

The operation of the unit is very simple. Turn it on by setting the rotary switch to the desired speed --High, Medium, or Whisper Quiet. (Dry is provided to assist in drying the filters after cleaning.) The Clean Air light (green) indicates that the filter is on and working properly.

At any of the three performance speeds (High, Medium or Whisper Quiet ) you can get an extra power boost by moving the rocker switch on the control panel from the Normalto the Super Clean position. Although you won't hear a difference, the Super Clean position can be used to increase the cleaning efficiency of the unit.

The speed should be set on High for one minute before switching

to the desired speed to initially start-up the unit.