Sears 153.321443 Anode Rod Inspection, Temperature-Pressure Relief Valve Operation, Draining

Page 18

The upper and lower thermostats are adjustable if a different water temperature is desired. Read all warnings in the “Temperature- Regulation” section before proceeding.

1.Turn “OFF” the electric power to the water heater at the junction box.

2.Take off the upper and/or lower access panel, insulation cap with handle.

3.The slotted adjustment (using a screwdriver) can be turned

clockwise () to increase the temperature setting or counter clockwise ( ) to decrease the temperature setting.

4.Replace the insulation cap with handle and access panel.

5.Turn “ON” the power supply.

Anode Rod Inspection

The anode rod is used to protect the tank from corrosion. Most hot water tanks are equipped with an anode rod. The submerged rod sacrifices itself to protect the tank. Instead of corroding the tank, water ions attack and eat away the anode rod. This does not affect the water’s taste or color. The rod must be maintained to keep the tank in operating condition.

Anode deterioration depends on the water conductivity, not necessarily water condition. A corroded or pitted anode rod indicates high water conductivity and should be checked and/or replaced more often than an anode rod that appears to be intact. Replacement of a depleted anode rod can extend the life of your water heater. Inspection should be conducted by calling Sears Service Center. At a minimum the anode(s) should be checked annually after the warranty period.

Temperature-Pressure Relief Valve Operation

The temperature-pressure relief valve must be manually operated at least once a year.

The temperature-pressure relief valve must be manually operated at least once a year. Caution should be taken to ensure that

(1)no one is in front of or around the outlet of the temperature- pressure relief valve discharge line, and (2) the water manually discharged will not cause any property damage or bodily injury. The water may be extremely hot.

FIGURE 28.

If after manually operating the valve, it fails to completely reset and continues to release water, immediately close the cold water inlet to the water heater, follow the draining instructions, and replace the temperature-pressure relief valve with a new one.

Failure to install and maintain a new properly listed temperature- pressure relief valve will release the manufacturer from any claim which might result from excessive temperature or pressure.

If the temperature-pressure relief valve on the appliance weeps or discharges periodically, this may be due to thermal expansion. Your water heater may have a check valve installed in the water line or a water meter with a check valve. Consult your local Sears Service Center for further information. Do not plug the temperature-pressure relief valve.

Draining

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Power Misertm Electric Water Heater Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.ASafe INSTALLATION, USE and Service General Safety Table of Contents Product Specifications IntroductionMaterials Needed Additional Tools Needed When Sweat SolderingMaterials and Basic Tools Needed Basic ToolsInstallation Instructions Removing the Old Water HeaterFacts to Consider About the Location Insulation BlanketsFacts to Consider About Convertible Lower Element Water Piping Temperature-Pressure Relief Valve Valve and Pipe InsulationFilling the Water Heater Converting the Lower Element Page Wiring Page Wiring Diagrams Temperature Settings Service and AdjustmentTemperature Regulation Upper and Lower Thermostat AdjustmentsTemperature-Pressure Relief Valve Operation Anode Rod InspectionDraining Thermostat Removal/Replacement Element Cleaning/ReplacementPage Page Drain Valve Washer Replacement ServiceTroubleshooting Start Up ConditionsOperational Conditions AIR in HOT Water Faucets Water is TOO HOT Leakage Checkpoints Repair Parts List Model NumbersKenmore Power Misertm Electric Water Heaters Page Page Page MY-HOME

153.321443, 153.321442, 153.321643, 153.321342, 153.321842 specifications

The Sears models 153.321343, 153.321843, 153.321543, 153.321542, and 153.321642 represent a collection of versatile and innovative products that highlight Sears' commitment to quality and functionality. These models are notable for their distinct features and technologies that cater to a variety of consumer needs.

One of the main characteristics common to these models is their robust build quality. Each model is designed using durable materials that ensure longevity and resilience against wear and tear. This is particularly important for consumers looking for reliable products that can withstand daily use.

In terms of technological features, these models are equipped with advanced functionalities that enhance user experience. For instance, the inclusion of smart technology allows for seamless integration with home automation systems. This enables users to control aspects of the device through mobile applications or voice commands, ensuring convenience and accessibility.

Another noteworthy aspect is their energy efficiency. These models are designed with energy-saving features that help reduce overall power consumption without compromising performance. This is not only environmentally friendly but also translates to cost savings for consumers in the long run.

The versatility of the Sears models is evident in their wide range of applications. Each model is tailored to meet specific needs, whether for household tasks or specialized functions, making them suitable for a variety of users. This adaptability makes the models appealing to a broader audience, from casual users to more demanding consumers.

Moreover, these models often incorporate user-friendly interfaces. Easy-to-navigate controls and clear displays allow users to operate the devices without the need for extensive instructions, making them ideal for individuals of all ages and technological backgrounds.

Sears continues to provide exceptional customer support and warranty options with these models, further enhancing customer satisfaction and trust. This commitment to service ensures that buyers feel secure in their purchase, knowing they have support should any issues arise.

In conclusion, the Sears models 153.321343, 153.321843, 153.321543, 153.321542, and 153.321642 exemplify the brand's dedication to quality, innovation, and user-centered design. With their durable construction, advanced technology, energy efficiency, versatility, and strong customer support, they stand out in a competitive market, appealing to a wide range of consumers seeking reliable and multifunctional products.
Top Page Image Contents