Electrical Hook-Up
Locate nearest 120V A.C. wall socket in the location desired, preferably on inside wall. Plug in the electrical cord.
WARNING: To reduce the risk of fire or shock hazard, humidifier should
be plugged into a 120V A.C. outlet. Do not use extension cords.
To reduce the risk of electrical shock, this humidifier has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet,
reverse plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way.
Water Fill
WARNING: To reduce the risk of shock, always unplug humidifier before clean- ing or servicing.
WARNING: To reduce the risk of fire or shock hazard, do not pour or spill water
Into conb'of or motor area. Close the control cover. If controls get wet, let them dry completely and have unit checked by an authorized service per- sonnel before plugging in.
This humidifier is designed to be filled using a bucket fill method. The unit should be positioned where it will be operating. To fill the 12 gallon humidifier, close the con- trol cover and open the pivoting lid. Notice
the splash guard inside the cabinet of the humidifier.
Use recommended mixture of cold water and if necessary Sears Bacteriostat #42- 14900 only. Pour the water slowly from a bucket into the cabinet onto the splash guard. The water deflects off the splash guard and drops into the bottom of the cab- inet. Do not pour water onto top of unit or control area. Standing in front of the humidifier, notice the "PULL" labels posi-
tioned to the left and right of the splash guard on the inner sides of the cabinet.
These labels indicate the maximum amount of water that can be poured into the humidifier.
Do not fill water in the cabinet above this line. If you do, water will leak out of the cabinet and onto the floor.
Pivoting Lid
Front of Humidifier