Fluke 568, 566 user manual Maintenance, Battery Charge, Changing the Batteries

Page 25

Infrared Thermometers

Maintenance

Maintenance

Battery Charge

Use the battery charge symbols to gauge the approximate level of charge left on the batteries.

Notes

When in low battery mode, the thermometer does not store values. “Err” appears on the display if attempted.

JBatteries are at 5 %. Before taking further readings, the batteries must be changed.

Changing the Batteries

Note

The batteries should be replaced in less than one minute after removal to avoid manually re-initializing the thermometer clock and date.

To install or change the two AA batteries (see Figure 8):

1.Slide the locking tab on the battery door to the “unlock” position and then open the handle.

2.Insert the batteries noting their correct polarity.

3.Close and lock the handle.

AA

(+)

eyl04.eps

Figure 8. Battery Replacement

17

Image 25

Contents 566/568 Limited Warranty and Limitation of Liability Table of Contents 566/568 List of Tables 566/568 List of Figures 566/568 Contacting Fluke IntroductionWWarning Safety InformationSymbols Explanation Symbols and MarkingsDisplay Language FeaturesSave Menu OverviewDescription Memory LightEmissivity Menu Nominal Surface Emissivity Material Value Min, Max, Avg, DifferentialMaterial Value Trigger Lock AlarmLaser Backlight SetupDeleting Data LanguageHow the Thermometers Work Temperature MeasurementOperating the Thermometer Locating a Hot or Cold Spot Locating a Hot or Cold SpotDistance and Spot Size Distance and Spot SizeEmissivity Field of ViewDownloading Data Storing DataTroubleshooting Symptom Cause Action TroubleshootingExternal Contact Probe Battery Charge MaintenanceChanging the Batteries Cleaning the Lens User Replaceable Parts and AccessoriesCleaning the Housing AccessoriesRecommended Temperature Probes Specifications Feature Type Thermocouple Probe Bead Type Measurement Range Feature 566 568 Battery LifeCE Certification Cable Length566/568