Honeywell CT3300 warranty Installation and Programming Instructions, Table of Contents

Page 1

MagicStat® CT3300 Programmable Thermostat

Installation and Programming Instructions

Welcome to the world of comfort and energy savings with your new Honeywell MagicStat® Programmable Thermostat. Your new thermostat will automatically control the temperature in your home, keeping you comfortable while saving energy.

If you have any questions about using this thermostat, visit our home expert Web site at www.honeywell.com/yourhome or call Honeywell Customer Relations at 1-800-468-1502.

Weekday/Weekend (5-day/2-day)

Programmable Heat and/or Cool

Low Voltage (20 to 30 Vac)

Thermostat and Mounting Plate

Model CT3300

Table of Contents

Installation	2
Programming	11
Operation	17
Change the clock for Daylight/	17
Standard Time
Set the Fan and System switches	17
Replace the batteries	18
Override the program settings	19
Frequently asked questions	22
Limited 1-Year Warranty	24

®U.S. Registered Trademark

Copyright © 2001 Honeywell • All Rights Reserved

69- 0654- 5

Image 1

Contents Table of Contents Installation and Programming InstructionsVerify that you have the right thermostat InstallationRecycling thermostat Required tools and supplies Optional tools Prepare for installationCheck your progress Remove the old thermostatInstall the mounting plate Set the thermostat for your type of heating system Fuel SwitchType of system Screws a and B Fuel switch Wire the thermostat terminalsHeating system table Mount the thermostat Install the batteriesSix or more wires Special wiring instructionsThree thermostat wires Wires that are not connected to the old thermostatFive wires connected to the old thermostat Faceplate illustration and descriptions ProgrammingDescriptions Set the current time and day Learn about the programming featuresProgramming tips Program period Description When availableHeating Program Program the heating scheduleSchedule Period Cooling Program Program the cooling scheduleVerify that your heating system works Check out the systemVerify that your cooling system works Setting Result Set the Fan and System switchesOperation Change the clock for Daylight/Standard TimeReplace the batteries Switch Setting ResultIf you see Batteries are You should Change the temperature temporarily Override the program settingsHold a temperature indefinitely Cancel a program Check the current programmed temperatureCheck programs Check how long heat/air conditioning has been running Reset the cumulative usage counter to zeroChange a program permanently Then Frequently asked questionsCustomer assistance Home and Building Control Limited 1-year warranty