Honeywell CT3300 warranty Programming tips, Program period Description When available

Page 13

Program period

Description

When available

 

 

 

WAKE

The time when you get up and get ready to leave your home.

Weekdays and weekend

 

You can set the system at a comfortable temperature for this

 

 

period.

 

 

 

 

LEAVE

The time when you are regularly away from home. You can set

Weekdays only

 

an energy-saving temperature for this period.

 

 

 

 

RETURN

The time between returning home and going to bed. You can

Weekdays only

 

set the system at a comfortable temperature for this period.

 

 

 

 

SLEEP

The time when you are sleeping. You can set an energy-saving

Weekdays and weekend

 

temperature for this period.

 

 

 

 

Programming tips

You do not need to program times and temperatures for all program periods.

If you decide not to program your thermostat, it will automatically control heating at 68°F (20°C) and cooling at 78°F (26°C), 24 hours a day.

If you decide not to program weekend schedules, the temperature that is programmed for the weekday SLEEP schedule will remain in effect until the next program period, which begins on Monday morning.

The temperatures cannot be set any higher than 88°F (31°C) or any lower than 45°F (7°C).

When pressing the buttons, use the ball of your finger or a soft pencil eraser. Use of sharp fingernails or pencil points can damage the keypad.

If you make an error at any time during programming, press . Then press or until you reach the program period where you left off.

69-0654-5

PROGRAMMING 13

Image 13
Contents Table of Contents Installation and Programming InstructionsVerify that you have the right thermostat InstallationRecycling thermostat Required tools and supplies Optional tools Prepare for installationCheck your progress Remove the old thermostatInstall the mounting plate Set the thermostat for your type of heating system Fuel SwitchType of system Screws a and B Fuel switch Wire the thermostat terminalsHeating system table Mount the thermostat Install the batteriesSix or more wires Special wiring instructionsThree thermostat wires Wires that are not connected to the old thermostatFive wires connected to the old thermostat Faceplate illustration and descriptions ProgrammingDescriptions Set the current time and day Learn about the programming featuresProgramming tips Program period Description When availableHeating Program Program the heating scheduleSchedule Period Cooling Program Program the cooling scheduleVerify that your heating system works Check out the systemVerify that your cooling system works Setting Result Set the Fan and System switchesOperation Change the clock for Daylight/Standard TimeReplace the batteries Switch Setting ResultIf you see Batteries are You should Change the temperature temporarily Override the program settingsHold a temperature indefinitely Cancel a program Check the current programmed temperatureCheck programs Check how long heat/air conditioning has been running Reset the cumulative usage counter to zeroChange a program permanently Then Frequently asked questionsCustomer assistance Home and Building Control Limited 1-year warranty