Honeywell CT3300 warranty Program the cooling schedule, Cooling Program

Page 15

g.Press until the weekend schedule is displayed (Fig. 23).

h.Set the Saturday and Sunday WAKE time by pressing

or until the desired time is displayed.

i.Set the Saturday and Sunday WAKE temperature by pressing

or until the desired temperature is displayed (Fig. 24).

j.Press again to display a blank schedule for the SLEEP program period and repeat steps h. through j. to set the program.

Fig. 23

Fig. 24

Step 4. Program the cooling schedule

a.Write in the times and temperatures that you want to program for your cooling schedule.

Cooling

Program

WAKE

LEAVE

RETURN

SLEEP

Schedule

period

 

 

 

 

 

 

 

 

 

 

Suggested

Time

6:00 AM

8:00 AM

6:00 PM

10:00 PM

Settings

 

 

 

 

 

Temp

78°F (25.5°C)

85°F (29.5°C)

78°F (25.5°C)

82°F (28°C)

 

 

 

 

 

 

 

Weekday

Time

 

 

 

 

(Mon–Fri)

 

 

 

 

 

Temp

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Weekend

Time

 

 

 

 

(Sat–Sun)

 

 

 

 

 

Temp

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

69-0654-5

PROGRAMMING 15

Image 15
Contents Table of Contents Installation and Programming InstructionsInstallation Verify that you have the right thermostatRecycling thermostat Required tools and supplies Optional tools Prepare for installationCheck your progress Remove the old thermostatInstall the mounting plate Set the thermostat for your type of heating system Fuel SwitchWire the thermostat terminals Type of system Screws a and B Fuel switchHeating system table Mount the thermostat Install the batteriesWires that are not connected to the old thermostat Special wiring instructionsSix or more wires Three thermostat wiresFive wires connected to the old thermostat Programming Faceplate illustration and descriptionsDescriptions Set the current time and day Learn about the programming featuresProgramming tips Program period Description When availableProgram the heating schedule Heating ProgramSchedule Period Cooling Program Program the cooling scheduleCheck out the system Verify that your heating system worksVerify that your cooling system works Change the clock for Daylight/Standard Time Set the Fan and System switchesSetting Result OperationSwitch Setting Result Replace the batteriesIf you see Batteries are You should Override the program settings Change the temperature temporarilyHold a temperature indefinitely Check the current programmed temperature Cancel a programCheck programs Reset the cumulative usage counter to zero Check how long heat/air conditioning has been runningChange a program permanently Then Frequently asked questionsCustomer assistance Home and Building Control Limited 1-year warranty