Honeywell PCR-100, PCR-110 manual Function, Sources of danger

Page 4

If the unit is used for purposes other than those stated here, it shall not be considered to be use for the purpose intended.

IOnly connect sensors supplied with the unit. If a replacement sensor is required, only use sensors of the same type

(Part No. H61007 ).

IThe controller is not intended for use in vehicles because the possi- ble operating voltage ranges, interference level and environmental operating exceed the limits for which the controller can be used.

IPlease take the application limits into account (see Technical Data in section 11).

3.2 Function

IPCR-100 and PCR-110 are general-purpose thermostats, each with a relay output and wide temperature control range

(–55 °C to +50 °C).

IThe controllers have different housings:

PCR-100: Modular housing for 35 mm standard rails

PCR-110: “Snap-in” installation housing, which fits into aperture 28.5 x 70.5 mm.

IControl performance: 2-step, on/off, with reversible direction for heating and refrigerating.

IDefrost option for chilling systems if continuous operation of the evaporator fan is foreseen in the switching box.

IEasy to operate thanks to digital input of setpoint value and switching difference.

IData is not lost, even if there is a power failure, for at least 10 years.

IAlarm output.

4 Safety

4.1 Sources of danger

ICaution - Mains voltage!

INever expose the unit to water or moisture. Risk of malfunction and short circuit. Only use the unit when it is adjusted to normal ambient temperature (+15 to. +30 °C). Extreme changes in tempe- rature in combination with high atmospheric humidity may lead to the formation of condensed water.

IEven if the control circuit is switched off, high voltage may still be applied to the controller. For this reason, isolate all electric circuits before starting any service work.

INever expose the unit to excessive heat, dust and vibrations. Avoid knocks and pressure loads. If the housing is damaged, there is a risk of an electric shock causing death or injury.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents PCR-100 PCR-110 Installation and Operating Instructions Table of Contents Unpacking the unit and conditions of use Use for the purpose intendedFunction Sources of dangerSafety precautions Housings with 1 mounting tabSnap in housings Electrical installationInstructions Switching on the operating voltage Clear alarmFor excess Temperature Functions of keysAccess to the programming level is by pressing Setting the cold store temperatureInput parameters and input ranges E00E01 E02Taneous temperature when the stored value is reached Exiting programming modeE10 During the defrosting process, the last current tempeMaintenance Alarm messagesClearing the alarm Display MeaningConditions of warranty PTC Only operate the unit in dry placesEC Declaration of Conformity Dr. Osthues Production ManagerAutomation and Control Solutions

PCR-100, PCR-110 specifications

The Honeywell PCR-110 and PCR-100 are state-of-the-art portable gas detection instruments designed to meet the rigorous demands of industrial safety and environmental monitoring. These devices are part of Honeywell’s long-standing reputation for innovation in safety technology and are ideal for organizations that prioritize the health and safety of their workforce while complying with regulatory standards.

The PCR-110 is specifically designed for multi-gas detection, capable of identifying a range of hazardous gases, including volatile organic compounds (VOCs), carbon monoxide, hydrogen sulfide, and methane. With its advanced sensor technology, the PCR-110 offers high sensitivity and responsiveness, providing real-time detection that is essential for prompt decision-making in hazardous situations. Furthermore, it features a user-friendly interface that allows for easy operation, ensuring that users can quickly access information and alerts.

On the other hand, the PCR-100, while similar in design, is optimized for specific applications and offers features tailored to particular industries and environments. Both models support a robust data logging capability, allowing users to store and analyze gas concentration trends over time, thus enhancing their understanding of potential risks.

A significant highlight of both models is their use of advanced wireless communication technology. The PCR-110 and PCR-100 can conveniently connect to Honeywell’s secure cloud-based platform. This connectivity enables real-time monitoring and remote access to data, facilitating efficient management and response strategies. Users can set thresholds for gas concentrations and receive immediate notifications should the levels exceed safe limits.

Durability is another critical characteristic of Honeywell’s gas detectors. Both models are constructed to withstand harsh environmental conditions, making them suitable for use in various industrial settings, including oil and gas, chemical manufacturing, and waste management. Their rugged design ensures that they can endure exposure to dust, moisture, and extreme temperatures, ensuring reliable performance in the field.

Equipped with long-lasting battery life, both the PCR-110 and PCR-100 maximize operational uptime. Moreover, their lightweight and compact form factor ensures that they can be easily carried or mounted, offering versatility in any work environment.

In conclusion, the Honeywell PCR-110 and PCR-100 provide a comprehensive solution for gas detection across multiple sectors, combining advanced technologies, durable construction, and user-focused design. Their capabilities empower organizations to enhance safety protocols and effectively manage gas-related risks, ultimately fostering a safer working environment.
Top Page Image Contents