Honeywell PCR-110, PCR-100 manual Access to the programming level is by pressing

Page 9

IInput values are always changed using the or key with the key held down.

IInput parameters, e.g. the switching difference is shown as “E” with a 2-digit number, e.g. “E 01”.

IAccess to the programming level is by pressing the and

key at the same time for 5 seconds.

The parameters to be changed can then be accessed by pressing the and keys.

ITo exit from the programming level and save the data, press the key after the last input parameter. If no key is pressed in the programming level for 10 minutes, this mode will be exited without the data being saved.

IDo not display altered parameter data before saving the data, as it would be reversed to its original value in the process.

6.4 Setting the cold store temperature

Press and hold down the key. Adjust the setpoint on the value in question using the or key.

Adjustment is possible within the limits of the input parameters E01 and E02.

The factory setting is +4°C.

6.5 Manual defrost

Press and hold down the key for 5 seconds. The manual defrosting process will be initiated by forcibly de-energizing the relay.

If parameter E09 is set to 0: no defrosting will be started.

7 Programming

Access to the programming level:

IPress and hold down firmly the and keys at the same time for approx. 5 seconds. (E00 appears on display.)

IUse or key to select parameters.

ISetting: Press and hold down the key. Adjust the setpoint value to the desired figure using the or key.

IDo not display altered parameter data before saving the data, as it would be reversed to its original value in the process.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents PCR-100 PCR-110 Installation and Operating Instructions Table of Contents Use for the purpose intended Unpacking the unit and conditions of useSources of danger FunctionHousings with 1 mounting tab Safety precautionsElectrical installation Snap in housingsInstructions Clear alarm Switching on the operating voltageFor excess Temperature Functions of keysSetting the cold store temperature Access to the programming level is by pressingE00 Input parameters and input rangesE01 E02Exiting programming mode Taneous temperature when the stored value is reachedE10 During the defrosting process, the last current tempeAlarm messages MaintenanceClearing the alarm Display MeaningConditions of warranty Only operate the unit in dry places PTCDr. Osthues Production Manager EC Declaration of ConformityAutomation and Control Solutions

PCR-100, PCR-110 specifications

The Honeywell PCR-110 and PCR-100 are state-of-the-art portable gas detection instruments designed to meet the rigorous demands of industrial safety and environmental monitoring. These devices are part of Honeywell’s long-standing reputation for innovation in safety technology and are ideal for organizations that prioritize the health and safety of their workforce while complying with regulatory standards.

The PCR-110 is specifically designed for multi-gas detection, capable of identifying a range of hazardous gases, including volatile organic compounds (VOCs), carbon monoxide, hydrogen sulfide, and methane. With its advanced sensor technology, the PCR-110 offers high sensitivity and responsiveness, providing real-time detection that is essential for prompt decision-making in hazardous situations. Furthermore, it features a user-friendly interface that allows for easy operation, ensuring that users can quickly access information and alerts.

On the other hand, the PCR-100, while similar in design, is optimized for specific applications and offers features tailored to particular industries and environments. Both models support a robust data logging capability, allowing users to store and analyze gas concentration trends over time, thus enhancing their understanding of potential risks.

A significant highlight of both models is their use of advanced wireless communication technology. The PCR-110 and PCR-100 can conveniently connect to Honeywell’s secure cloud-based platform. This connectivity enables real-time monitoring and remote access to data, facilitating efficient management and response strategies. Users can set thresholds for gas concentrations and receive immediate notifications should the levels exceed safe limits.

Durability is another critical characteristic of Honeywell’s gas detectors. Both models are constructed to withstand harsh environmental conditions, making them suitable for use in various industrial settings, including oil and gas, chemical manufacturing, and waste management. Their rugged design ensures that they can endure exposure to dust, moisture, and extreme temperatures, ensuring reliable performance in the field.

Equipped with long-lasting battery life, both the PCR-110 and PCR-100 maximize operational uptime. Moreover, their lightweight and compact form factor ensures that they can be easily carried or mounted, offering versatility in any work environment.

In conclusion, the Honeywell PCR-110 and PCR-100 provide a comprehensive solution for gas detection across multiple sectors, combining advanced technologies, durable construction, and user-focused design. Their capabilities empower organizations to enhance safety protocols and effectively manage gas-related risks, ultimately fostering a safer working environment.
Top Page Image Contents