Honeywell PCR-110, PCR-100 manual Safety precautions, Housings with 1 mounting tab

Page 5

IIf the unit cannot be operated without the risk of danger, it must be taken out of service and precautions taken so that it cannot be switched on again unintentionally.

This applies, in particular, if:

u the housing has damage which is visible, u the unit is no longer operational or

u it has been stored for a long time in unfavourable conditions.

IThe unit must not be opened. If it is thought that the unit may be defective, send it back to the dealer or manufacturer with a precise description of the fault.

4.2 Safety precautions

IAll electromagnetic loads (solenoid valves, contactors, horns, motors) should be interference suppressed directly at the coil with RC elements.

IPlease note the maximum contact rating of the relays and terminals.

If this is not observed, there is a risk that the contacts may pit or stick, with the result that the refrigeration system will not operate correctly and the refrigerated items may be damaged.

ISensor leads are to be routed separately from mains voltage wires: the clearance should be at least 5 cm.

ISensor leads must not be routed in multiple cables with other leads carrying mains voltage, otherwise the system may malfunction.

ITighten the terminals carefully; excessive strain will result in damage to the controller.

5 Installation and commissioning

5.1 Mechanical installation

I4 DIN Standard modular housings to be mounted on a standarr rail:

a) housing with 2 mounting tabs:

Open out the side mounting tabs; clip the unit on to the 35 mm rail and press tabs in again.

b) housings with 1 mounting tab:

Put housing on the upper 35 mm rail. Clip the unit on the 35 mm rail, lower tab clips on the rail automatically.

To remove the unit from the rail press in lower mounting tab a screw driver, lift unit.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents PCR-100 PCR-110 Installation and Operating Instructions Table of Contents Use for the purpose intended Unpacking the unit and conditions of useSources of danger FunctionHousings with 1 mounting tab Safety precautionsElectrical installation Snap in housingsInstructions Clear alarm Switching on the operating voltageFor excess Temperature Functions of keysSetting the cold store temperature Access to the programming level is by pressingE00 Input parameters and input rangesE01 E02Exiting programming mode Taneous temperature when the stored value is reachedE10 During the defrosting process, the last current tempeAlarm messages MaintenanceClearing the alarm Display MeaningConditions of warranty Only operate the unit in dry places PTCDr. Osthues Production Manager EC Declaration of ConformityAutomation and Control Solutions

PCR-100, PCR-110 specifications

The Honeywell PCR-110 and PCR-100 are state-of-the-art portable gas detection instruments designed to meet the rigorous demands of industrial safety and environmental monitoring. These devices are part of Honeywell’s long-standing reputation for innovation in safety technology and are ideal for organizations that prioritize the health and safety of their workforce while complying with regulatory standards.

The PCR-110 is specifically designed for multi-gas detection, capable of identifying a range of hazardous gases, including volatile organic compounds (VOCs), carbon monoxide, hydrogen sulfide, and methane. With its advanced sensor technology, the PCR-110 offers high sensitivity and responsiveness, providing real-time detection that is essential for prompt decision-making in hazardous situations. Furthermore, it features a user-friendly interface that allows for easy operation, ensuring that users can quickly access information and alerts.

On the other hand, the PCR-100, while similar in design, is optimized for specific applications and offers features tailored to particular industries and environments. Both models support a robust data logging capability, allowing users to store and analyze gas concentration trends over time, thus enhancing their understanding of potential risks.

A significant highlight of both models is their use of advanced wireless communication technology. The PCR-110 and PCR-100 can conveniently connect to Honeywell’s secure cloud-based platform. This connectivity enables real-time monitoring and remote access to data, facilitating efficient management and response strategies. Users can set thresholds for gas concentrations and receive immediate notifications should the levels exceed safe limits.

Durability is another critical characteristic of Honeywell’s gas detectors. Both models are constructed to withstand harsh environmental conditions, making them suitable for use in various industrial settings, including oil and gas, chemical manufacturing, and waste management. Their rugged design ensures that they can endure exposure to dust, moisture, and extreme temperatures, ensuring reliable performance in the field.

Equipped with long-lasting battery life, both the PCR-110 and PCR-100 maximize operational uptime. Moreover, their lightweight and compact form factor ensures that they can be easily carried or mounted, offering versatility in any work environment.

In conclusion, the Honeywell PCR-110 and PCR-100 provide a comprehensive solution for gas detection across multiple sectors, combining advanced technologies, durable construction, and user-focused design. Their capabilities empower organizations to enhance safety protocols and effectively manage gas-related risks, ultimately fostering a safer working environment.
Top Page Image Contents