Niles Audio Niles Speaker Switch and SI 1260 Configuration Guide

Page 21

BusMatrixInput DIP Switch Settings

Each channel has a dedicated BusMatrixDIP switch bank that assigns that chan- nel's source input signal (see Figure 15). To assign the BusMatrixsource input sig- nal for a particular channel, set only one of the seven switches to the right.

DIP Switch Settings

1L is for the assignment of the Left Bus Input #1

1R is for the assignment of Right Bus Input #1

1L+1R is for the assignment of a summed mono signal of the Left and Right Bus Input#1

2L is for the Left Bus Input #2

2R is for the Right Bus Input #2

2L+2R is for a summed mono signal of the Left and Right Bus Input #2

The seventh switch assigns the dedicated input to its respective channel

Again, only one of the seven DIP switches

“OFF” Position “ON” Position

should be configured to the "ON" position

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(switched to the right).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Figure 15 - BusMatrixDIP Switches

STEP

DESCRIPTION

INSTALLATION

1.Move only one (1) DIP switch to the "ON" position for each channel.

CAUTION! EACH DIP SWITCH ALLOWS YOU TO MOVE ALL SEVEN SLIDE SWITCHES TO THE "ON" POSITION. IF YOU SET MORE THAN ONE SLIDE SWITCH TO "ON" YOU MAY CREATE AN UNDESIRABLE MIX OF INPUTS ON THE ENTIRE BUS.

20

Image 21
Contents Systems Integration Amplifier Congratulations Table of ContentsIntroduction IntroductionFeatures and Benefits Features and BenefitsFreedom From Noise and Cross-Talk Twelve to Six Channel Configurable PowerIndependent Level Controls Turn-On ModesSingle Zone System Design BasicsCable and Wire Speaker CompatibilitySystem Design Considerations Using Mono For Smoother Coverage Applications Advantages of Using The SI-1260 in a Single Zone SystemLow Cost Second Zone for CDs Creating a Low-Cost Second Zone Using a Dedicated SourceUsing a Dual Zone Receiver Using a Dual-Zone Receiver for Two Listening ZonesAdding Preamps To Create More Listening Zones Applications & System Design ConsiderationsDual BusMatrix Input Utilizing the Dual BusMatrix InputConfiguring Your System Configuring Your SystemSample Configuration Worksheet Installation Considerations Installation ConsiderationsPlacement AC Power Plug InstallationInstallation Line Level Audio InputsFront and Rear Panel DetailsFront and Rear Panel Details Label all wires Speaker Wire ConnectionsBanana plug to the black terminal One to the red terminalBusMatrix DIP Switches BusMatrix Input DIP Switch SettingsBridging Two Channels into One Control Output Setting the Turn-On Mode SwitchPower LED Indicator Front Panel Power SwitchOperation OperationSolid Green Channel Pair LED IndicatorsUsing Level Controls as Limiters Cleaning and Maintenance Listening at Higher VolumesTroubleshooting Guide Troubleshooting GuidePower LED is slowly VolumeSound is phasey Some or all channelsConfiguration Worksheet Configuration WorksheetSpecifications SpecificationsNiles Audio Corporation
Related manuals
Manual 2 pages 8.94 Kb

SI-1260 specifications

The Niles Audio SI-1260 is a high-performance multi-channel amplifier designed to deliver exceptional sound quality and power for home audio systems. Renowned for its reliability and versatility, this amplifier is perfect for both custom installations and standalone use, catering to audiophiles and casual listeners alike.

One of the standout features of the SI-1260 is its impressive power output. With 60 watts per channel at 8 ohms, this amp provides ample power to drive a variety of speakers, ensuring clear and dynamic sound reproduction across different genres of music and audio formats. For users who require additional power, the SI-1260 can deliver 100 watts per channel at 4 ohms, making it suitable for larger rooms and demanding setups.

The SI-1260 employs advanced Class D amplification technology, which is known for its efficiency and minimal heat generation. This not only leads to lower energy consumption but also allows for a more compact design—a crucial aspect for home installations where space can be at a premium. The amplifier’s compact size does not compromise its performance; it boasts a robust output that maintains sound integrity even at higher volumes.

Another significant advantage of the SI-1260 is its versatile connectivity options. Equipped with multiple inputs, including RCA and balanced XLR connections, users can seamlessly integrate it into their existing audio systems. This flexibility allows the amplifier to work well with a variety of audio sources, including home theater systems, whole-house audio systems, and more.

The SI-1260 also incorporates advanced protection circuitry, safeguarding against overloads, short circuits, and overheating. This ensures not only the longevity of the amplifier itself but also the longevity of connected speakers, providing peace of mind for users.

For those who appreciate ease of use, the Niles Audio SI-1260 features a universal control interface, allowing compatibility with remote control systems and automation. This makes it an ideal choice for smart home integrations, enhancing the user's overall audio experience.

In conclusion, the Niles Audio SI-1260 stands out as a feature-rich, powerful, and efficient multi-channel amplifier suitable for a wide range of audio applications. With its excellent power output, advanced Class D technology, versatile connectivity, and reliable protection features, it delivers high-quality sound that meets the demands of modern audio enthusiasts.