Niles Audio SI-1260 manual Listening at Higher Volumes, Cleaning and Maintenance

Page 27

Listening at Higher Volumes

An output of 60 watts is adequate power to completely drown out conversation in a normal sized room. Even at those levels, the SI-1260 will sound clear and clean. Obviously, it requires more power to achieve a reasonable volume of sound in a large room than it does in a small room. Even if you are normally very careful, it is possible to turn the volume so high that the amplifier runs out of power. This cre- ates "clipping" distortion.

Clipping distortion makes treble sound very harsh and unmusical. If you hear harsh sounding treble from any speakers, immediately turn down the level controls for the channel pairs connected to those speakers. These harsh sounds include power- ful high frequency sound spikes that will quickly damage the tweeter of any loud- speaker.

If you continue to operate the amplifier at "clipping" power levels the protection circuits will operate. The protection circuits will reset when output signal condi- tions have returned to normal. Perpetually over-driving your speakers and amplifier is abuse and will void the manufacturer's warranty on all affected products.

Cleaning and Maintenance

The internal parts of the SI-1260 are electronic and require no maintenance. Once a year it is appropriate to twist each input RCA connector to remove any oxidation and improve conductivity.

You can clean the amplifier with soft cloth or a paper towel dampened with water.

DO NOT use any spray-type or abrasive cleaners on the amplifier.

OPERATION

26

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Systems Integration Amplifier Congratulations Table of ContentsIntroduction IntroductionFeatures and Benefits Features and BenefitsTurn-On Modes Twelve to Six Channel Configurable PowerFreedom From Noise and Cross-Talk Independent Level ControlsSingle Zone System Design BasicsCable and Wire Speaker CompatibilitySystem Design Considerations Using Mono For Smoother Coverage Applications Advantages of Using The SI-1260 in a Single Zone SystemLow Cost Second Zone for CDs Creating a Low-Cost Second Zone Using a Dedicated SourceUsing a Dual Zone Receiver Using a Dual-Zone Receiver for Two Listening ZonesAdding Preamps To Create More Listening Zones Applications & System Design ConsiderationsDual BusMatrix Input Utilizing the Dual BusMatrix InputConfiguring Your System Configuring Your SystemSample Configuration Worksheet Installation Considerations Installation ConsiderationsPlacement Line Level Audio Inputs InstallationAC Power Plug InstallationFront and Rear Panel DetailsFront and Rear Panel Details One to the red terminal Speaker Wire ConnectionsLabel all wires Banana plug to the black terminalBusMatrix DIP Switches BusMatrix Input DIP Switch SettingsBridging Two Channels into One Control Output Setting the Turn-On Mode SwitchOperation Front Panel Power SwitchPower LED Indicator OperationSolid Green Channel Pair LED IndicatorsUsing Level Controls as Limiters Cleaning and Maintenance Listening at Higher VolumesTroubleshooting Guide Troubleshooting GuideSome or all channels VolumePower LED is slowly Sound is phaseyConfiguration Worksheet Configuration WorksheetSpecifications SpecificationsNiles Audio Corporation
Related manuals
Manual 2 pages 8.94 Kb

SI-1260 specifications

The Niles Audio SI-1260 is a high-performance multi-channel amplifier designed to deliver exceptional sound quality and power for home audio systems. Renowned for its reliability and versatility, this amplifier is perfect for both custom installations and standalone use, catering to audiophiles and casual listeners alike.

One of the standout features of the SI-1260 is its impressive power output. With 60 watts per channel at 8 ohms, this amp provides ample power to drive a variety of speakers, ensuring clear and dynamic sound reproduction across different genres of music and audio formats. For users who require additional power, the SI-1260 can deliver 100 watts per channel at 4 ohms, making it suitable for larger rooms and demanding setups.

The SI-1260 employs advanced Class D amplification technology, which is known for its efficiency and minimal heat generation. This not only leads to lower energy consumption but also allows for a more compact design—a crucial aspect for home installations where space can be at a premium. The amplifier’s compact size does not compromise its performance; it boasts a robust output that maintains sound integrity even at higher volumes.

Another significant advantage of the SI-1260 is its versatile connectivity options. Equipped with multiple inputs, including RCA and balanced XLR connections, users can seamlessly integrate it into their existing audio systems. This flexibility allows the amplifier to work well with a variety of audio sources, including home theater systems, whole-house audio systems, and more.

The SI-1260 also incorporates advanced protection circuitry, safeguarding against overloads, short circuits, and overheating. This ensures not only the longevity of the amplifier itself but also the longevity of connected speakers, providing peace of mind for users.

For those who appreciate ease of use, the Niles Audio SI-1260 features a universal control interface, allowing compatibility with remote control systems and automation. This makes it an ideal choice for smart home integrations, enhancing the user's overall audio experience.

In conclusion, the Niles Audio SI-1260 stands out as a feature-rich, powerful, and efficient multi-channel amplifier suitable for a wide range of audio applications. With its excellent power output, advanced Class D technology, versatile connectivity, and reliable protection features, it delivers high-quality sound that meets the demands of modern audio enthusiasts.
Top Page Image Contents