Note on Power Sources

Battery replacement and handling

When the operating time becomes short, even after a battery is recharged, please replace the battery. Please use only “AA” rechargeable Ni-MH batteries.

Warning

To avoid the risk of personal injury or property damage from fire or electrical shock, only use the Uniden adapter model specifically designated for this product, and “AA” rechargeable Ni-MH batteries.

Power Failure

During the period that the power is off, you will not be able to make or receive calls with the telephone.

Caution

Use only “AA” rechargeable Ni-MH batteries.

Do not remove the batteries from the handset to charge them.

Never throw the batteries into a fire, disassemble them, or heat them.

Do not remove or damage the battery casing.

Maintenance

When the handset or base unit becomes slightly dirty Wipe with a soft, dry cloth.

When the handset or base unit becomes very dirty Wipe with a soft cloth that has been dampened with diluted, neutral detergent. Dry with a dry cloth.

Caution

Do not use paint thinner, benzene, alcohol, or other chemical products.

Doing so may discolor the surface of the telephone and damage the finish.

When the charging contacts become very dirty on both the handset and base unit

Using water only, dampen a cloth to clean the charging contacts. Then make sure to go back over the charging contacts with a dry cloth before returning the handset to the base unit to charge.

[ 70 ] A D D I T I O N A L I N F O R M AT I O N

Page 72
Image 72
Uniden DCT5280 manual Maintenance, Battery replacement and handling, Power Failure