Playing incoming messages

1)When the phone is in the standby mode, press the soft key on the handset.

Remote Playback” appears on the handset display. The answering system announces the current time and the number of messages stored in the memory. Messages will be played in the order in which they were received. The time and day that each message was received is announced after the message is played.

2)When you are finished, hang up to exit the system. The answering system automatically returns to standby.

When the last message has been played, the system announces “End of messages”. And the system returns to standby.

Repeating a message

After a message begins playing, press the soft key within about four seconds to

repeat the previous message, or press the soft key after about four seconds to repeat the current message.

Skipping a message

While the message is playing, press the soft key on the handset. Each time

the soft key is pressed, the system scans forward one message.

Deleting a message

While the message is playing, Press the DELETE soft key on the handset. The message playing is deleted.

If you have new messages and old messages, only the new messages will be played. After you have reviewed your new messages, you can play your old messages by again

pressing the soft key. Once you have listened to a new message, it then becomes an

old message.

If you have new messages and old messages, only the new messages will be repeated.

If you press the soft key while the earliest message is playing, you can repeat only the current message.

THE INTEGRATED ANSWERING DEVICE

T H E I N T E G R AT E D A N S W E R I N G D E V I C E [ 63 ]

Page 65
Image 65
Uniden DCT5280 manual Playing incoming messages, Repeating a message