Placement

INSTALLATION CONSIDERATIONS

CAUTION! Placing the SI-1260’s weight on the rear or front panels will cause dam- age to the amplifier’s connectors or controls.

Place the SI-1260 on a flat, level surface like a table or shelf. The SI-1260 must be placed with its weight equally distributed on the unit's four feet. This amplifier, like any high-fidelity component, will last much longer if it is given adequate ventilation for proper cooling. When installing the SI-1260 in a cabinet, be sure that the cabi- net's rear is open to fresh air (see Figure 11). Additionally, place the SI-1260 so that there are at least 6 inches of free air space above the amplifier and 1 inch on each side. If the amplifier is located on a carpeted surface, place a board under the ampli- fier's feet. If the cabinet's design will not accommodate an open rear, install two small "boxer fans" to provide continuous air flow into and out of the cabinet (see Figure 12).

CAUTION! When using low impedance speaker loads (less than 4 ohms Normal Mode, less than 8 ohms Bridged Mode), refer to figure 12 for proper placement.

CAUTION! DO NOT block the ventilation holes on the top and bottom of the SI- 1260.

The SI-1260 is equipped with a massive toroidal power transformer. This transformer generates a powerful magnetic field that could induce a hum in a turntable (particu- larly a turntable equipped with a moving coil cartridge). DO NOT place a turntable directly above or directly adjacent to the SI-1260.

CAUTION! Before placing the SI-1260 on a shelf, verify that the weight bearing capacity of the shelf is 70 lbs or greater.

Figure 11

Figure 12

Make sure that there is a minimum of 6” of free air space above the amplifier and 1” on each side for proper ventilation.

Boxer Fan (105 CFM) directly centered 6” on top of the SI-1260.

Boxer Fan (105 CFM) directly centered 2” behind the SI-1260.

	If the cabinet rear is not open to fresh
	air or if your using low impedance
Allow a minimum of 2” of depth	loads, install two “boxer fans” to pro-
behind the unit to accommodate	vide continuous air flow into and out
cables and connectors .	of the cabinet.

SI-1260 specifications

The Niles Audio SI-1260 is a high-performance multi-channel amplifier designed to deliver exceptional sound quality and power for home audio systems. Renowned for its reliability and versatility, this amplifier is perfect for both custom installations and standalone use, catering to audiophiles and casual listeners alike.

One of the standout features of the SI-1260 is its impressive power output. With 60 watts per channel at 8 ohms, this amp provides ample power to drive a variety of speakers, ensuring clear and dynamic sound reproduction across different genres of music and audio formats. For users who require additional power, the SI-1260 can deliver 100 watts per channel at 4 ohms, making it suitable for larger rooms and demanding setups.

The SI-1260 employs advanced Class D amplification technology, which is known for its efficiency and minimal heat generation. This not only leads to lower energy consumption but also allows for a more compact design—a crucial aspect for home installations where space can be at a premium. The amplifier’s compact size does not compromise its performance; it boasts a robust output that maintains sound integrity even at higher volumes.

Another significant advantage of the SI-1260 is its versatile connectivity options. Equipped with multiple inputs, including RCA and balanced XLR connections, users can seamlessly integrate it into their existing audio systems. This flexibility allows the amplifier to work well with a variety of audio sources, including home theater systems, whole-house audio systems, and more.

The SI-1260 also incorporates advanced protection circuitry, safeguarding against overloads, short circuits, and overheating. This ensures not only the longevity of the amplifier itself but also the longevity of connected speakers, providing peace of mind for users.

For those who appreciate ease of use, the Niles Audio SI-1260 features a universal control interface, allowing compatibility with remote control systems and automation. This makes it an ideal choice for smart home integrations, enhancing the user's overall audio experience.

In conclusion, the Niles Audio SI-1260 stands out as a feature-rich, powerful, and efficient multi-channel amplifier suitable for a wide range of audio applications. With its excellent power output, advanced Class D technology, versatile connectivity, and reliable protection features, it delivers high-quality sound that meets the demands of modern audio enthusiasts.