Graco 217567, 206661 warranty Injection Hazard

Page 3

WARNING

INJECTION HAZARD

Spray from the gun, leaks or ruptured components can inject fluid into your body and cause extremely serious injury, including the need for amputation. Fluid splashed in the eyes or on the skin can also cause serious injury.

DFluid injected into the skin might look like just a cut, but it is a serious injury. Get immediate surgical treatment.

DDo not stop or deflect leaks with your hand, body, glove or rag.

DKeep your hands away from the end of the drain valve when opening it.

DLock the gun trigger safety when you stop spraying.

DFollow the Pressure Relief Procedure on page 7 if the spray tip clogs and before cleaning, checking or servicing the equipment.

DFollow the Pressure Relief Procedure on page 7 before removing the regulator’s adjusting knob.

DDo not pressurize the system when the fluid regulator’s adjusting knob is removed.

DTighten all fluid connections before operating the equipment.

DCheck the hoses, tubes, and couplings daily. Replace worn or damaged parts immediately. Do not repair high pressure couplings; you must replace the entire hose.

DUse only Graco approved hoses. Do not remove the spring guard that is used to help protect the hose from rupture caused by kinks or bends near the couplings.

TOXIC FLUID HAZARD

Hazardous fluid or toxic fumes can cause serious injury or death if splashed in the eyes or on the skin, inhaled, or swallowed.

DKnow the specific hazards of the fluid you are using.

DStore hazardous fluid in an approved container. Dispose of hazardous fluid according to all local, state and national guidelines.

DAlways wear protective eyewear, gloves, clothing and respirator as recommended by the fluid and solvent manufacturer.

306878 3

Image 3
Contents Table of Contents Instructions-Parts ListEquipment Misuse Hazard SymbolsInjection Hazard Installation Installing the Fluid RegulatorBefore Installing the Fluid Regulator Multiple Circulating Spray Station Single Direct Spray Station306878 Pressure Relief Procedure Adjusting the RegulatorOperation Flushing MaintenanceCleaning RepairingPart NO. Description QTY PartsPage Compression Springs AccessoriesTechnical Data Fluid Pressure GaugesGraco Information Graco Standard Warranty