Hunter Fan 42711-01 operation manual Attaching the Thermostat

Page 19

installing the thermostat, cont.

ATTACHING THE THERMOSTAT

Lift the thermostat cover and set the SYSTEM switch to OFF and the FAN switch to AUTO.

1.Locate the HE/HG switch on the back of the thermostat. Set the switch to HG (default) for gas furnace and oil burners. Set the switch to HE for electric furnaces.

(The switch has no effect when the system is set to cooling mode.)

2.Locate the Auto Recovery switch on the back of the thermostat. If you wish to use the Auto Recovery feature, verify that the switch is in the ENABLE position. If you do not wish to use this feature, simply change the switch to the DISABLE position. See pages 44-45 for more information.

3.System type - Locate the System Type switch on the back of the thermostat. Select either STD (Standard) or HP (Heat Pump) to match your system.

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents
Set & $ave Page Table of Contents Set & Save Important information Tools Page Page Locate, but do not disconnect the wires RC / VC Uninstalling the existing unit, Page Installing the Wall Plate Page Installing the thermostat, RCRHY/0W/BY1 Connecting the Wires Thermostat Cover Attaching the Thermostat Tab Installing the thermostat, Reset Default setting of the thermostat is Fahrenheit Fo Day/time SETTINGS, Heat Methods of operation Heat Manual Operation System Manual OPERATION, Default Programs Chart Default Programs Program Press Program to enter Program mode. Creating Custom ProgramsHeat Cool Methods of operation, Filter Icons and Features Reset Icons and FEATURES, Stage Icons and FEATURES, Hold /return Icons and FEATURES, Page Icons and FEATURES, Program Range Wiring Wiring, Wiring, Troubleshooting Display will come on, but it will not stay illuminated LCD screen permanently reads HI, LO, or ERR Is there help on the web? Can’t I just call someone?
Top Page Image Contents