SETTINGS, cont.
The default for this thermostat setting is in a 12 hour format. You can change the format to 24 hour format by pressing Day/Time and then Program.
The AM/PM indicator will be off when the thermostat is in 24 hour mode.
Setting day and time:
1.Press Day/Time. (AM/PM and current hour will flash)
2.Press Up or Down to adjust the setting.
3.Press Day/Time again to adjust the minute setting.
4.Press Day/Time again to adjust the day of the week.
5.Press Day/Time to return to the normal display.
You may also press Hold/Return at any time to return to the normal display.
25