Lux Products TX9000 installation instructions Features, Installation, Tools Required

INSTALLATION AND OPERATING

INSTRUCTIONS

TX9000 SERIES

SMART TEMP ® ELECTRONIC THERMOSTAT

			Easy
	1500	1500	as
Installs Easily	Set Day & Time	Choose Heat or Cool	1–2–3

LUX PRODUCTS CORPORATION 52002

Mt. Laurel, New Jersey 08054 USA

WARNING: Use Energizer® or DURACELL® Alkaline Batteries Only.

Energizer® is a registered trademark of Eveready Battery Company, Inc. DURACELL® is a registered trademark of The Gillette Company, Inc.

I M P O R T A N T !

•The Unit can be used with most 24 volt gas, oil or electric heating and air conditioning systems, single-stage heat pumps or gas millivolt heating systems. It cannot be used with 120 volt heating systems or multistage heat pumps. Ask your dealer for other LUX thermostats to control those systems.

•The Unit is programmable. There are four programming periods per day. Each period can be programmed separately.

•You can use the built-in time/temperature programs, or alter them to suit your schedule. The Unit provides separate programming for every day of the week- for both heating and cooling. You can override the programmed tempera- tures for as little as one programming period or for an entire vacation.

•In cool weather, when the system switch is set to HEAT, the Unit will maintain cooler “set back” room temperatures to save energy. It will then change to warmer “comfort” settings — all automatically, at specified times during the day.

•In warm weather, when the system switch is set to COOL, the Unit will maintain warmer “set back” room temperatures to save energy. It will then change to cooler “comfort” settings - all automatically, at specified times during the day.

•A large liquid crystal display shows time, day of the week, and room and set temperatures. It will remind you when the filter should be changed in your blower and track your system’s energy usage.

•Temperature swing adjustment lets you fine-tune your system for maximum comfort and economy.

•A 4-minute minimum on/off time in COOL prevents your air conditioning system from being damaged.

•Two Energizer® or DURACELL® “AA” alkaline batteries (not included) are used to retain your time and temperature programs.

C A U T I O N

•Your thermostat is a precision instrument. Please handle it with care.

READ

INSTALLATION INSTRUCTIONS FIRST

Thank you for your confidence in our product. To obtain the best results from your investment, please read these instructions and acquaint yourself with your purchase before installing your new thermostat. Then follow the installation procedures, one step at a time. This will save you time and minimize the chance of damaging the thermostat and the systems it controls. These instructions may contain information beyond that required for your particular installation. Please save for future reference.

•Turn off electricity to the appliance before installing or servicing thermostat or any part of the system. Do not turn electricity back on until work is completed.

•Do not short (jumper) across electric terminals at control on furnace or air conditioner to test the system. This will damage the thermostat and void your warranty.

•All wiring must conform to local codes and ordinances.

•This thermostat is designed for use with 24 volt and millivolt systems. The thermostat should be limited to a maximum of 1.0 amps; higher amperage may cause damage to the thermostat. If you are in doubt, call your utility company.

FEATURES

The Active Program Period	The Set
Liquid Crystal	Temperature

INSTALLATION

Please read all instructions carefully before beginning installation.

LUX Speed	Display
Dial®

Thermostat

Body

System

Switch

Fan Switch

TOOLS REQUIRED

#1 Phillips screwdriver (small) Drill with 3/16-in. (4.8mm) bit

THERMOSTAT LOCATION

On replacement installations, mount the new thermostat in place of the old one unless the conditions listed below suggest otherwise. On new installations, follow the guidelines listed below.

1.Locate the thermostat on an inside wall, about 5 ft. (1.5m)

C A U T I O N

To avoid electrical shock and to prevent damage

to the furnace, air condi- tioner, and thermostat, disconnect the power

supply before beginning work. This can be done at the fuse box, at the circuit breaker, or at the appliance.

PATENT NO. 5,673,850

SIMPLIFIED INSTRUCTIONS

TO SET TIME & DAY	TO SET PROGRAMS	TEMPORARY TEMPERATURE OVERRIDE	Easy to
• Rotate Dial to SET	• Rotate Dial to SET	•Press UP/DOWN to adjust set temperature.
DAY/TIME.	WEEKDAY,	•To clear OVERRIDE press UP/DOWN until
• Press UP to change	SATURDAY or	original set temperature appears or wait for
current day.	SUNDAY PROGRAM.	the start tf the next period.	follow
to set time.	• Press NEXT.	• Press HOLD. Adjust temperature as
• Press NEXT.	• Press UP/DOWN to adjust	TEMPERATURE HOLD
• Press UP/DOWN	start time.		Instructions
	• Press NEXT.	desired with UP/DOWN.
	• Press UP/DOWN to adjust
	temperature.	•To clear, press HOLD again.

• Repeat as needed or rotate

dial to RUN to stop Programming.

Button to Light	Thermostat
	Cover
Display

above the floor, and in a room that is used often.

2.Do not install it where there are unusual heating conditions, such as: in direct sunlight; near a lamp, radio, television, radiator, register, or fireplace; near hot water pipes in a wall; near a stove on the other side of a wall.

3.Do not locate in unusual cooling conditions, such as: on a wall separating an unheated room; or in a draft from a stairwell, door, or window.

4.Do not locate in a damp area. This can lead to corrosion that will shorten thermostat life.

5.Do not locate where air circulation is poor, such as: in a corner or an alcove; or behind an open door.

6.Do not install the unit until all construction work and painting has been completed.

7.This thermostat does not require leveling.

© COPYRIGHT 2006 LUX PRODUCTS CORPORATION. ALL RIGHTS RESERVED 1