Lux Products TX9000 Advanced Features, Setting the Time of DAY, Energy Usage Monitor

Rotate dial to SET WEEKDAY PROGRAM. To				FOR: MORN
program SATURDAY or SUNDAY, rotate the dial to				PROGRAM	MO TU WE TH FR SET TEMP
					HEAT
				START AT:	TEMP
SET SATURDAY or SET WEEKEND PROGRAM.				AM
With dial on SET WEEKDAY PROGRAM, you will
see this display.
UP	DOWN	To change the start	UP	DOWN	To change the start
		time for MORN.			time for EVE.
NEXT	To program temperature.		NEXT	To program temperature.
UP	DOWN	To change the temp.	UP	DOWN	To change the temp.
		setting for MORN.			setting for EVE.
NEXT To move to DAY.			NEXT	To move to NIGHT.
UP	DOWN	To change start time	UP	DOWN	To change the start
		for DAY.			time for NIGHT.
NEXT	To program temperature.		NEXT	To program temperature.
UP	DOWN	To change the temp.	UP	DOWN	To change the temp.
		setting for DAY.			setting for NIGHT.

NEXT To move to EVE.

The COPY button can be used to duplicate

the programs from any previous day.

Rotate dial to RUN position to start the programs or SET WEEKEND PROGRAM to continue programming.

C A U T I O N

The unit is protected against normal static electric discharges. However, in extremely dry weather you should touch another metal object before the unit to avoid potential loss of programs.

SETTING THE TIME OF DAY

Open the drop down door on the front of the thermostat. Rotate the dial to the SET DAY/TIME position. You should see the display pictured above with a day of the week flashing. When you are finished setting the day and time, rotate the dial to RUN to return to normal operation or to another position to continue programming.

UP	To change current day.	UP
	To set current time. The (e.g.	To change the current time.
NEXT		DOWN
	“12:00”) will be flashing.

TEMPERATURE OVERRIDE AND TEMPERATURE HOLD

These features let you change the current Set Temperature without changing the programs stored in your thermostat’s memory.

TEMPORARY TEMPERATURE OVERRIDE

Press UP/DOWN to change the current temperature setting. The

UP OVERRIDE indicator appears on display. The Override feature will be automatically canceled at the start of the next program period. To cancel OVERRIDE prior to next program period press

DOWN UP/DOWN until original set temperature appears. OVERRIDE indicator will disappear from display.

VACATION TEMPERATURE HOLD

Press HOLD. Adjust temperature as desired with UP/DOWN. HOLD Temperature setting will not change even after next program

period begins. To clear, press HOLD again.

ADVANCED FEATURES

ENERGY USAGE MONITOR

A timer in the unit records your systems’s ON time for the current day, the previous day, and cumulatively to let you see the effects of your temperature settings and weather conditions.

•Select HEAT to monitor heating energy usage or COOL to monitor cooling usage.

•Rotate the dial to SET ENERGY/USAGE

The current day’s ENERGY usage is displayed.

NEXT	To display yesterday’s	UP	To reset the display to zero.
	energy use.
	To display total ENERGY	UP	To undo the previous
NEXT	usage since the Monitor		reset to zero.
	was last set to zero.

Rotate the dial back to the RUN position.

FILTER USAGE MONITOR

The FILTER Monitor counts the hours since the filter in your blower was last changed. After 250 hours of use, FILTER will appear in the display. After you change the filter, set the thermostat’s FILTER Monitor back to zero as follows.

Rotate the dial to FILTER

UP	DOWN To reset the counter
To change the FILTER Usage Monitor limit
NEXT	Hold for two seconds	UP	DOWN To change the limit
			from 0-500 hours

To disable the FILTER Usage Monitor set the limit to 0 hours

TEMPERATURE SWING

A thermostat works by turning your heating or cooling system on and off whenever the room temperature varies a certain number of degrees from the set-point temperature. This variation is the “swing.” Your system should cycle on about 3 to 6 times per hour. A smaller swing number increases the number of cycles, so room temperature is more constant. A larger swing number decreases the number of cycles, to save energy in most cases.

SWING SETTINGS

Dial must be in the ENERGY USAGE position

HOLD	NEXT	Press together	NEXT	Press to set.
		To change the temp.
UP	DOWN	swing between 1-9
		(4=approx. ±1°F)

TEMPERATURE CALIBRATION

Rotate the dial to SET DAY/TIME

HOLD	NEXT	Press together
UP	DOWN	To adjust the thermostat

PROGRAM LOCK

To prevent tampering with set

programs. The sequence of keys NEXT NEXT NEXT HOLD to lock and unlock the program:

4