Desa RM200T owner manual Theory Operation, To Start Heater, To Stop Heater, To Restart Heater

Page 5

OWNER’S MANUAL

THEORY OF

OPERATION

The Fuel System: The air pump forces air through the air line. The air is then pushed through the burner head nozzle. This air causes fuel to lift from the tank. A fine mist of fuel is sprayed into the combustion chamber.

The Air System: The motor turns the fan. The fan pushes air into and around the combustion chamber. This air is heated and provides a stream of clean, hot air.

The Ignition System: The electronic ignitor sends voltage to the spark plug. The spark plug ignites the fuel and air mixture.

The Flame-out Control System: This system causes the heater to shut down if the flame goes out.

OPERATION

WARNING: Review and un- derstand the warnings in the Safety Information section, page

2.They are needed to safely op- erate this heater. Follow all local codes when using this heater.

TO START HEATER

1.Follow all ventilation and safety information.

2.Fill fuel tank with kerosene or No. 1 fuel oil.

3.Attach fuel cap.

4.Plug power cord of heater into three- prong, grounded extension cord. Exten- sion cord must be at least six feet long.

Extension Cord Wire Size Requirements

6 to 10 feet long, use 18 AWG rated cord

11 to 100 feet long, use 16AWG rated cord

101 to 200 feet long, use 14AWG rated cord

5.Plug extension cord into standard 120 volt/60 hertz, three-hole, grounded out- let. Adjust thermostat to desired setting. If heater does not start, thermostat set- ting may be too low. Turn thermostat knob to higher position to start heater. If thermostat is in HIGH position and heater still will not start, push in flame- out control reset button (see Figure 4). Note: A cold heater may affect the ther- mostat setting. This thermostat is a gen- eral-heating control. It is not intended for precise temperature control. Adjust thermostat until heater cycles at the desired setting.

TO STOP HEATER

 

Combustion

Spark

Motor

Air Pump

 

 

Air

 

Chamber

Plug

Burner

Fan

 

Intake

 

 

 

Head

 

 

 

 

 

Filter

 

 

 

 

 

Clean

 

 

 

 

Cool Air

 

 

 

 

In

Heated

 

 

 

 

 

Air Out

 

 

 

 

 

 

 

 

 

 

Air

 

 

 

 

 

Output

 

 

 

 

 

Filter

Fuel

Nozzle

Fuel

 

Air Line

Electronic

Tank

 

Filter

 

To Burner

Ignitor

 

Air For Fuel

 

Air For Combustion

Fuel

 

System

 

And Heating

 

Figure 3 - Cross Section Operational View

Unplug extension cord from outlet.

TO RESTART HEATER

1.Wait two minutes after stopping heater.

2.Repeat steps under To Start Heater.

Flame-out

Control

Reset

Button

Figure 4 - Flame-out Control Reset Button

103607

5

Image 5
Contents Portable Forced AIR Heater Portable Forced AIR Heater Safety InformationUnpacking Product IdentificationFuels AssemblyVentilation Tools NeededTo Start Heater Theory OperationTo Stop Heater To Restart HeaterSchedule Preventative MaintenanceStoring TRANSPORTING, or Shipping Observed Fault Possible Cause Remedy TroubleshootingPump Pressure Adjustment Service ProceduresUpper Shell Removal FANFuel Valve Fuel FilterNozzle Spark PlugPump Rotor Procedure if Rotor is BindingRM200T Illustrated Parts BreakdownKEY Part Number Description QTY Parts ListSpecifications Wheels and Handle Parts ListMaintenance Kits Technical ServiceAccessories Replacement Parts Wiring DiagramWarranty Service Limited WarrantyRepair Service International

RM200T specifications

Desa RM200T is a cutting-edge machine designed to elevate agricultural efficiency and productivity. This advanced piece of equipment is specifically engineered for farmers and agricultural enterprises seeking robust performance, durability, and modern technology.

One of the key features of the Desa RM200T is its powerful engine, which provides high torque and reliability even under challenging conditions. The engine is designed for fuel efficiency, allowing users to maximize productivity while minimizing operational costs. This feature is particularly important for farmers looking to optimize their resources and achieve better returns on their investments.

The RM200T boasts an ergonomic design, focusing on user comfort and ease of operation. The controls are intuitively placed, enabling operators to handle the machine with minimal training. The spacious cabin is equipped with air conditioning and excellent visibility, ensuring that users can work comfortably and efficiently for extended periods.

In terms of technology, the Desa RM200T integrates smart farming solutions. It is equipped with GPS systems for accurate navigation and mapping, allowing for precision agriculture practices. This technological advancement enables farmers to analyze field data effectively, leading to informed decision-making and enhanced crop management.

Another noteworthy characteristic of the RM200T is its versatility. It can adapt to a variety of agricultural tasks, including plowing, tilling, and planting. This multi-functionality makes it an invaluable asset for farmers, allowing them to use one machine for a range of operations, thus saving time and reducing the need for multiple equipment purchases.

The durability of the Desa RM200T is a significant highlight. Built with high-quality materials, it can withstand harsh weather conditions and heavy workloads. Regular maintenance is made easy with accessible components, ensuring that the machine remains in optimal working condition over time.

Furthermore, the RM200T is designed with sustainability in mind. Its fuel-efficient engine and minimal environmental impact align with modern farming practices, which prioritize ecological responsibility.

In summary, the Desa RM200T is a remarkable piece of agricultural machinery characterized by its powerful engine, user-friendly design, advanced technology, versatility, durability, and commitment to sustainability. It positions itself as an essential tool for modern farmers aiming to enhance their productivity and embrace the future of agriculture.