Congratulations

T2SNAC01, T2SNHP01

NON-PROGRAMMABLE THERMOSTAT

Homeowner’s Guide

A08147

INTELLIGENT, EASY TO USE

Congratulations on your purchase of a new Bryant thermostat. Your new thermostat combines computer like intelligence with extremely simple operation in an elegant package. Designed to maximize performance, your Bryant thermostat provides reliable, accurate temperature control while blending into any home’s decor. As you read on, you’ll quickly see how easy it is to set up and operate your new thermostat and enjoy the comfort of your home.

COMFORT AT YOUR COMMAND

Bryant has met the needs of homeowners nationwide with their non-programmable thermostat. Controlling your heating and cooling system at the touch of a button, this powerful device helps deliver comfort year round.

MAKING LIFE EASIER

Take a few minutes to review the features and functions listed at the right. Bryant gives you control over your comfort with simple instructions, responsive push buttons and an easy-to-read backlit display. Once set, this thermostat reliably monitors indoor temperature and responsively meets your comfort demands.

Up and Down Buttons

increase or decrease the desired temperature setting.

FAN Button

chooses between CONTINUOUS FAN and AUTO FAN operation.

MODE Button

selects between OFF, HEAT, COOL, AUTO, and OFF operation. Heat pump thermostat models also include an EMERGENCY HEAT mode.

LOW BATTERY Indicator

will light when batteries (if installed) need to be replaced.

SERVICE FILTER Indicator

lets you know it is time to clean or replace your system’s air filter.

Room Temperature Display

shows current room temperature.

COOL ON Indicator

is displayed when the cooling equipment is operating.

HEAT ON Indicator

is displayed when the heating equipment is operating.

RESET FILTER Button

restarts the timer that calculates the next air filter change or cleaning.

AUXILIARY HEAT Indicator

is displayed when a heat pump system is operating with auxiliary heat air filter.

SETTING & OPERATING THE THERMOSTAT

Setting your indoor temperature set points

1.Press the UP or DOWN button.

The LCD readout will be illuminated and the heating or cooling temperature set point will be displayed, but will not change. Next to the temperature display, HEAT or COOL indicates which temperature set point is being displayed.

2.Continue to press the UP or DOWN buttons until your desired heating or cooling temperature set point is displayed.

3.Press the MODE button to select the second temperature setting (either HEAT or COOL).

4.Press the UP or DOWN buttons until your second desired temperature set point is displayed.

NOTE: Your COOL setting must be at least 2_ higher than your HEAT setting. Your thermostat will automatically change your previously set temperature to maintain that 2_ difference.

Setting fan operation

1.Press the FAN button to switch between ON and AUTO fan se ttings.

FAN on indicator will be displayed on LCD. When the ON mode is selected, the fan runs continuously for improved air circulation.

When the AUTO mode is selected, the fan runs only as needed to maintain your desired indoor temperature. FAN on indicator is not displayed on LCD.

Setting mode operation

1.Press the MODE button.

2.On the LCD readout, the words OFF, HEAT, COOL, and AUTO will rotate as the MODE button is pressed.

If you have a heat pump, the LCD readout will show OFF, HEAT, COOL, AUTO, and EMERGENCY HEAT (EHEAT).

NOTE: In AUTO mode, your system will heat OR cool as needed to reach your desired temperature. AUTO mode may be disabled.

T2SNAC01, T2SNHP01 specifications

The Bryant T2SNHP01 and T2SNAC01 heat pump and air conditioner systems are designed to provide efficient heating and cooling solutions for residential environments. These systems represent Bryant's commitment to quality, durability, and energy efficiency, making them excellent choices for homeowners seeking reliable climate control.

The Bryant T2SNHP01 is a high-efficiency heat pump system, which can provide both heating and cooling. It features advanced two-stage heating and cooling capabilities, ensuring balanced temperature control and consistent comfort. This model employs a variable-speed compressor, which allows it to adjust its output based on the home's specific requirements. This adaptability not only enhances comfort levels but also leads to significant energy savings by operating efficiently across varying conditions.

One of the standout features of the T2SNHP01 is its SEER (Seasonal Energy Efficiency Ratio) rating. With ratings as high as 16, this heat pump can significantly reduce energy consumption compared to lower-rated systems, leading to lower utility bills. The system operates quietly as well, thanks to its insulated compressor and fan design, which minimizes sound levels for a more pleasant home environment.

On the other hand, the Bryant T2SNAC01 serves as a highly efficient air conditioning unit designed to maximize cooling performance. Similar to its heat pump counterpart, the T2SNAC01 utilizes two-stage cooling. This dual cooling capability allows for optimal performance during both extreme temperatures and more moderate weather conditions. Like the T2SNHP01, this model also boasts impressive SEER ratings, offering efficiency that meets or exceeds industry standards.

Both systems incorporate the latest in eco-friendly refrigerant technology, using R-410A refrigerant, which is known for its lower environmental impact compared to older refrigerants. Additionally, both units are built with durable materials aimed at withstanding various weather conditions, ensuring longevity and reliability.

Another key characteristic is the smart technology integration available in both models. Homeowners can take advantage of Bryant's Smart Thermostat compatibility, allowing for remote control and programming via smartphones, enhancing user convenience and control over home climate.

In summary, the Bryant T2SNHP01 and T2SNAC01 provide efficient, reliable heating and cooling solutions. With their high SEER ratings, advanced technologies, eco-friendly refrigerants, and smart capabilities, these systems are well-suited for homeowners who prioritize comfort and energy savings in their climate control choices.