Quick Start Set the Clock and Go
MODE
FAN
Press the Mode button. While holding the Mode, press the Fan button
for 2 seconds to enter Setup screens.
During Setup & Programming: Pressing the Mode button selects different flashing items. (Represented in dark black)
I2:00 | I |
SuMoTuWeThFrSa2
Press both Mode and | MODE |
Fan buttons as |
|
above to return to | FAN |
normal operation. |
|
Pressing the Up and Down buttons will modify the flashing selection.
To adjust the
Press clock or Day use
MODE
buttons.
The thermostat is preprogrammed from the
factory to operate 1 or 2 Stage equipment* without the need for further programming. To optimize the installation of this thermostat follow the instructions in the Advanced Setup section.
*The thermostat is not preprogrammed from the factory to operate electric heat or heat pump systems.
To control these systems, follow the steps in the Advanced Setup section, pages 12 & 13.
Page 5