Operation, Configuration Menu | Emerson 1F83-277 manual

Before you begin programming your thermostat, you should be familiar with its features and with the display and the location and operation of the thermostat buttons. Your thermostat con- sists of two parts: the thermostat cover and the base. To remove the cover, pull it straight out from the base. To replace the cover, line up the cover with the base and press until the cover snaps onto the base.

The Thermostat Buttons and Switches

1Raises temperature setting

2Lowers temperature setting.

3 FAN switch (ON, AUTO)

4	SYSTEM button (COOL, AUTO, HEAT, EMER, OFF)
4	SYSTEM button (COOL, AUTO, HEAT, EMER, OFF)	STG1+2
		STG1+2

EMER

OPERATION

FAULT

The Display

5Flame icon () is displayed when the system is in HEAT mode. Snowflake icon () is displayed when the system is in COOL mode. Flame icon () and

Snowflake icon () are displayed simultaneously when thermostat is in AUTO mode.

6Displays “BATT” when the 2 "AA" batteries are low and should be replaced. Only “BATT” and “LO” in the minutes field are displayed when batteries are low and with no system power.

7Displays current temperature or “LO” in the minutes field when batteries are low.

8Displays set temperature (this is blank when SYSTEM is OFF).

9Displays “FLTR” when the system has run for the programmed filter time period as a reminder to change or clean your filter.

10Display () when in keypad lockout mode.

11“EMER” is displayed flashing when the system is in EMER mode.

Figure 6 – Thermostat display, buttons and switches

12“FAULT” will be displayed when there is a malfunction in the HEAT/COOL system.

13Display ( ) when limited HEAT/COOL range is activated. The “ ” icon will flash if an attempt is made to adjust the temperature beyond the limited HEAT/COOL temperature range.

14Stage 1 & 2 indicators: The thermostat shall indicate when the first and second stage is energized except in emergency mode. The icon is “STG 1” for the first stage energized. The icons for the first and second stage energized are “STG1+2” located in the upper right side of the display.

CONFIGURATION MENU

The configuration menu allows you to set certain thermostat operating characteristics to your system or personal require- ments.

Set SYSTEM button to OFF, then simultaneously press and to enter configuration menu. The display will show the first item in the configuration menu.

The configuration menu table summarizes the configuration options. An explanation of each option follows.

Press SYSTEM to change to the next menu item. To exit the menu and return to the program operation, press RUN. If no keys are pressed within fifteen minutes, the thermostat will revert to normal operation.

1)Single Stage, Multi-stage or Heat Pump System Configuration – This control can be configured for Heat Pump or two stage heat/two stage cool multi-stage opera- tion. The display indicates “MS 2” (default for multi-stage mode) in the display. The Multi-stage configuration can be

toggled to “SS1”, “HP2”, or “HP1” by pressing the or key. In Multi-stage configuration, SYSTEM button will not have EMERgency mode.

2)Fast or Slow Cycle Selection – The factory default setting is fast cycle, which cycles 1st stage at approximately 1.2°F and 2nd stage 0.75°F. If you prefer slow cycle, press the

or key to change to SL. The 1st stage and 2nd stage would be 1.5°F and 1.2°F respectively.

1F83-277 specifications

The Emerson 1F83-277 is a sophisticated programmable thermostat designed to bring efficiency and comfort to residential heating and cooling systems. This device stands out with its user-friendly interface and advanced features, making it an ideal choice for homeowners looking to modernize their HVAC control.

One of the main features of the 1F83-277 is its intuitive touchscreen display. The vibrant, easy-to-read screen allows users to effortlessly navigate through menus and settings. This interface is critical for accessing various functionalities, including temperature settings, scheduling programs, and energy-saving modes.

The thermostat is equipped with a five-day programming capability, enabling users to establish distinct heating and cooling schedules for weekdays and weekends. This level of customization allows for optimal energy management, as homeowners can set the temperature to match their daily routines. By adjusting the temperature according to specific usage patterns, users can significantly reduce energy consumption and lower utility bills.

Another notable feature is the inclusion of Smart Response Technology, which learns the heating and cooling needs of the home and adjusts the operation of the HVAC system accordingly. This intelligent adaptation ensures that the desired temperature is reached at the right time, enhancing overall comfort while maximizing energy efficiency.

The Emerson 1F83-277 supports multiple heating and cooling stages, accommodating various HVAC systems, including conventional, heat pump, and multi-stage configurations. This versatility makes it suitable for a wide range of residential settings, ensuring compatibility with most existing systems.

Additionally, the thermostat features a user-friendly setup process, allowing for quick installation and easy connectivity. It is compatible with various systems, including conventional, heat pumps, and gas or electric heating, which means it can fit seamlessly into any home environment.

Another key characteristic is its energy-saving features, such as an Eco mode that helps to minimize energy usage when the home is unoccupied. This is further augmented by the ability to track energy usage, enabling users to monitor their consumption patterns and make informed adjustments.

Overall, the Emerson 1F83-277 blends advanced technology with user-centric design, providing an efficient and comfortable heating and cooling solution for today's discerning homeowners.