Hearth and Home Technologies Installation Guide for DM1036 and Odvilla-42T Fireplace Doors

Note: Glass doors aid in the prevention of loss of room heat through an open chimney.

A. For Use on Reveal Series Appliances

•Door installation on the RBV4236 or RBV4842 requires longer pins. The longer pins and screws to attach them are located on the valve bracket of the appliance. See Figure 1.

Screws for DM Door Installation

Figure 1 Pins & Screws for DM Door Installation - Reveal

•Remove the shorter door pins using a phillips screwdriver and replace them with the longer pins. See Figure 2.

B. For Use on Odvilla-36, Odvilla-42 Outdoor Woodburning Fireplace

•Remove the screws from the door track area before placing the door tracks on the fireplace. Once in place reinsert screws.

C. For All Installations

•Fold one pair of doors. Insert the pin into the large hole located at the bottom outside corner of the fireplace opening. Tilt it toward the center of the fireplace such that the pins clear the top door track edge. Slide the pin into the top door track until the pin snaps into the hole in the spring clip.

•Doors may be adjusted by repositioning the spring clips in the screw slots, by loosening the screws and then retightening. Do not overtighten the screws!

•If removal becomes necessary, depress the spring clips located in the upper corners of the fireplace and tilt the doors towards the center of the fireplace opening.

Figure 2 Install Pins

FULLY OPEN	PARTLY OPEN
CORRECT	INCORRECT

FULLY CLOSED	PARTLY CLOSED
CORRECT	INCORRECT

Figure 3 Proper Operation of Bi-fold Glass Doors

2 Hearth & Home Technologies Inc. • DM Doors • 31178 Rev J • 11/10