Assa 32 manual USE of the UMB Bracket with the Model 34 Magnalock

Rev. A.5, 8/03 Page- 9

FIG. 9: USE OF THE UMB BRACKET WITH THE MODEL 34 MAGNALOCK

NOTE HOW BRACKET CAN BE REVERSED TO COPE WITH DIFFERENT STOP THICKNESSES

	BLADE
HEADER	STOP	HEADER	STOP
	UMB BRACKET			UMB BRACKET
		DOOR
DOOR
	MAGNET			MAGNET
	STRIKE		STRIKE

ALUMINUM DOOR AND FRAME	ALUMINUM DOOR AND FRAME
WITH BLADE STOP	WITH BLADE STOP

THE TWO LARGER HOLES ARE FOR THE

CABLE EXIT. THE TWO THREADED HOLES

ACCEPT THE MAGNET MOUNTING SCREWS.

THE REMAINING FIVE HOLES ACCEPT

DIFFERENT FASTENER TYPES TO MOUNT

TO DIFFERENT HEADERS.

Note that we have said "100% glass door". Some doors that appear to be glass are actually laminated with plastic. If the Magnalock with glass door bracket is used on this type of door, it is possible that failure will occur via delamination.

In some cases the header of a glass door is vertical glass. The magnet can be mounted on such a header by using a 3" X 3" aluminum angle bracket (part number HEB-3G). The bracket is glued to the vertical glass header with Securitron's adhesive kit for glass and the magnet is screwed to the bracket.

FIG. 10: STRIKE INSTALLATION ON 100% GLASS DOOR

2 X RUBBER WASHERS

R

O

O

D

T

S

E

S

K

A

C

GL

A

R

B

R

O

O

D

S

S

LA

G

			E
		IK
	R
T
S

1/4" X 3/4"

ROLL PINS

ADHESIVE BOND

NOTE: OMIT ROLL PIN WHITE PLASTIC BUSHINGS

5/16-18 x 1" (US) OR 8MM - 1.25MM X 25MM (METRIC)

FLATHEAD SCREW

WHITE PLASTIC

BUSHING