CDV Software PROMI 1000 manual Exit from programming, Reset, # Exit

Edition 10/2003

Press 1 to authorize the access for the selected user number (cardholder) or press 0 to deny ac- cess for the selected user number during the holidays.

The LED lights on in green G1

Then press #.

Press # to go back	The PROMI 1000 returns to the main menu O1
to the Main MENU

OR

Press * to authorize the access to all the cardholder O1

Press # to confirm and wait 5s until the new configuration is set for all the cardholder. The LED lights on in green V1

OR

Press # to deny access to all the cardholder during the holiday periods O1

Press # to confirm your choice and wait 5 seconds until the new configuration is set for all the cardholder.

The green LED lights on V1

Then press #.

Press # to go back to the Main MENU

The PROMI 1000 returns to the main menu O1

Q. Exit from programming

You must be in the main menu to exit from programming, press #

# Exit

O2

Once you exit from programming the PROMI 1000 is on stand-by the LED flashes in orange.

III.OPERATING INSTRUCTIONS

The key-in time between two digit is set at 10 seconds. Behond that time the data computed is canceled.

A. Reset

Place the ST1 jumper in 2-3 position.

The LED flashes in green during 5 seconds. The default master code is restored to 12345.

14