CDV Software PROMI 1000 manual Operating modes, Lockout

Page 15

Edition 10/2003

The LED flashes in red and a beep is emitted.

Remove the jumper from 2-3position then the unit goes back to stand-by mode.

OR

Keep the jumper on 2-3position to reset the badges, pin codes, schedules and holidays from the PROMI 1000 memory.

The LED flashes in red during 5 seconds then the LED lights on in red during the reset.

The LED starts flashing in orange when the reset is completed and a beep is emitted.

Remove the jumper from 2-3position to go back to stand-by mode.

OR

Keep the jumper on 2-3position to reset the events.

The LED flashes in orange during 5 seconds then lights on in orange during the reset.

The LED lights off when the reset of all the events is completed.

Remove the jumper from 2-3position to go back to stand-by mode.

B.Operating modes

---Mode 0 (badge and Pin code)

Present the badge in front of the PROMI 1000 unit. A beep is emitted when the badge is valid. Enter the 5-digit pin code. If the Pin code is valid the relay is activated and the access is granted. Two beeps are emitted to indicate that the badge or Pin code are invalid.

---Mode 1 (badge only)

Present the badge in front of the PROMI 1000 unit. The access is granted if the badge is valid. Two beeps are emitted to indicate that the badge is invalid.

---Mode 2 (badge or Pin code)

Present the badge in front of the PROMI 1000 unit. The access is granted if the badge is valid. Two beeps are emitted to indicate that the badge is invalid.

OR

Enter the 5- digit Pin code. If the Pin code is valid the access is granted.

C. Lockout

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Promi Promi Product presentation Presentation DU ProduitCurrent consumption Factory Default ValuesAudible signals Visual signalsDip switchs set up on the printer Paper errorGreen Code twice Colors and audible signalsMain menu Menu 00 Program badges and Pin codesMenu 01 Operating mode Press # go Back to Menu Menu 03 Alarm time outputMenu 02 Door release time Menu 04 Master codeThursday Menu 05 Setting date and hourMenu 06 Schedules WednesdayPress # to go back to the Main Menu Menu 07 HolidaysMenu 08 Anti pass back Menu 09 Printer and eventPress # to go back to the Main Menu Menu 10 Badge enrolment unit Menu 13 Setting accesses during the holidays Menu 11 Delete schedulesMenu 12 Delete holidays # Exit ResetExit from programming Press # to go back Promi 1000 returns to the main menu O1Lockout Operating modesLatched output Door contact AlarmEvent printing Momentary outputEvents Setting Date and HourMemory Anti pass backPromi Signalétique Promi ST1 without no rmal modeTerminal Signification User num Badge Pin Code Username Holiday Ber VI. Template
Top Page Image Contents