Edition 10/2003
After 3 incorrect badge and/or PIN code are entered, the PROMI 1000 reader and the second proximity reader are locked out during 2 minutes and the alarm relay is activated. 2 audible beeps sound when the badge/PIN code are not valid. The LED lights on in red during the time of the lockout. The LED flashes in orange when the lockout is finished.
D. Event printing
When a badge is presented or a Pin code is entered, the user number code of badge or Pin Code date, hour and operating mode are printed.
Valid badge
User number | Code of badge | Date | Heure |
521 Badge 022DC567 25.09.03 17.38 2
Invalid badge
xxx Badge 0236AD7C 25.09.03 17.40 2
The last
1000 events are stored in the memory buffer of the controller. The 1001 event replaces the first one.
E. Door contact - Alarm
The tamper switch activates the relay of the alarm when the front panel is removed. If the alarm time delay is different to 00, the door monitoring (door ajar or door forced open) is enabled:
When the door is opened, without being activated by the
When the badge or the
Momentary output
The alarm time delay begins at the end of the door release time. If the door is maintained open after the alarm time delay, the alarm relay is activated and the red LED lights on. Closing back the door will deactivate the alarm relay and the LED start flashing orange.
Latched output
The alarm time delay begins only when the door stays open after ordering the closing by present- ing back the badge or pressing on the
16