Assa ELECTRIC LOCK Powered Switching Devices AT the Doors, Switch Bypass Wiring Option KP1 or MK1

Page 2

Rev. A.1, 10/99

SECTION 4.3 FAIL SECURE LOCKS --------------------------------------------------------

Page 10

If the locks you will be using are fail secure (secure when not powered), this section should be carefully read to determine the proper hookup. Figure 4 (Page 12) shows the several different ways that fail secure locks may be connected to the panel.

SECTION 4.4 POWERED SWITCHING DEVICES AT THE DOORS ----------------

Page 14

Read this section if your are using a switching device at the door which employs power such as a digital keypad or card reader.

SECTION 4.5

WIRING UNUSED ZONES ---------------------------------------------------

Page 15

If any zones are not connected to locks, read this section.

 

SECTION 4.6

WIRING WITH RELEASE HOLD TIMER ---------------------------------

Page 15

If the locks include a momentary switch for entry or exit which activates a timer to release the door for an interval, this section shows preferred wiring techniques.

SECTION 4.7 REMOTE INDICATOR WIRING ---------------------------------------------

Page 16

If controls at the door such as push buttons or keyswitches include indicator lights, this section advises methods of wiring them for clear prompting to individuals using the door.

SECTION 4.8 AC LOCK CONTROL ----------------------------------------------------------

Page 17

This section explains use of the panel with AC locks.

 

SECTION 5. OPTION WIRING -----------------------------------------------------------------

Page 17

The following 5 sections explain the field wiring that relates to the options which may be supplied with the panel. In the case of certain options, it is possible that the option be added in the field by the installer if it ought to have been ordered but was not. Therefore, read the appropriate section for any option that has been supplied or that might be desired.

SECTION 5.1 SILENCE LATCH WIRING (OPTION "SL")------------------------------

Page 17

SECTION 5.2

EMERGENCY RELEASE WIRING (OPTION "PB") -------------------

Page 18

SECTION 5.3

WIRING OF "AM" OPTION FOR DELAYED EXIT---------------------

Page 18

SECTION 5.4

SWITCH BYPASS WIRING (OPTION "KP1" OR "MK1") -----------

Page 23

SECTION 5.5

SWITCH BYPASS WIRING (OPTION "KP2" OR "MK2") -----------

Page 24

SECTION 6 USE OF MULTIPLE PANELS--------------------------------------------------

Page 25

The three sections below explain different techniques of employing more than one panel to control and monitor the same set of electric locks.

SECTION 6.1

“MASTER/SLAVE PANELS (FOR FAIL SAFE LOCKS)

-------------Page 25

SECTION 6.2

MULTIPLE PANEL FAIL SECURE WIRING-----------------------------

Page 27

SECTION 6.3

PANELS ALTERNATELY ENABLED -------------------------------------

Page 27

SECTION 7. DOOR MONITORING (NO ELECTRIC LOCKS) -------------------------

Page 29

This section covers use of the panel for door monitoring

 

Image 2
Contents Panel Power Additional Monitoring Lights Option AMSwitch Bypass Wiring Option KP2 or MK2 Powered Switching Devices AT the DoorsSwitch Bypass Wiring Option KP1 or MK1 MASTER/SLAVE Panels for Fail Safe LocksPanel Power GeneralLock Control MonitoringAudible Alarm and Alarm Reset Summary of INDICATOR/SONALERT StatesEmergency Release Option PB OptionsSilence Latch Option SL High Volume Push Buttons Option HT Switch Bypass Keyswitch Options KP1, KP2, MK1, MK2Momentary Switches Option MOM Board Terminal Descriptions Panel Board OverviewWiring Power Input WiringPower Supply to LCP Board Wiring Type 2 Fail Safe Fail Safe LocksType 1 Fail Safe Fail Safe Lock Connections Type 5 Fail Safe Magnalock Type 3 Fail SafeType 4 Fail Safe Fail Secure LocksFail Secure Lock Connections Type 3 Fail Secure Type 1 Fail SecureType 2 Fail Secure Powered Switching Device AT Door Wiring DK-26 + Magnalock Type 4 Fail SecureWiring Unused Zones Wiring with Release Hold Timer Fail Safe and Fail SecureFail SAFE/FAIL Secure Timer Connections Remote Indicator WiringAC Lock Control Option WiringSilence Latch Wiring Option SL Emergency Release Wiring Option PB Field Installation of Emergency Release ButtonGeneral LCP/XDT Connections Without USE of Bypass Rev. A.1, 10/99 LED WHT MK KEY RED Switch General LCP/XDT Connections with USE of Bypass Switch Bypass Wiring Option KP1 or MK1 Fail Safe Locks Field Installation of Bypass Keyswitch Fail Safe Locks Switch Bypass Wiring Options KP2 or MK2 Fail Secure LocksField Installation of Bypass Keyswitch Fail Secure Locks USE of Multiple PanelsConnections Between Standard Board and Slave Board Multiple Panel Fail Secure Wiring Panels Alternately EnabledAlternately Enabled Panel Wiring Door Monitoring no Electric Locks Door Monitoring no Electric LocksMAGNACARE→ Limited Lifetime Warranty

ELECTRIC LOCK specifications

Assa Electric Lock is a cutting-edge security solution designed to address the evolving needs of modern access control systems. Utilizing advanced technologies, this lock integrates both traditional locking mechanisms with state-of-the-art electronic features, providing an unparalleled level of security for residential and commercial properties.

One of the standout features of the Assa Electric Lock is its ability to incorporate various access modes. Users can choose between key-based entry, key fob access, and mobile app control. This versatility ensures that users can select the most convenient method for their specific needs while still maintaining robust security. The inclusion of a mobile application elevates user control, allowing for remote access management and real-time monitoring of lock status.

The lock is engineered with robust materials, ensuring durability and resistance to tampering. It features a high-quality housing that can withstand environmental elements, making it suitable for both indoor and outdoor installations. The Assa Electric Lock is also designed to function seamlessly with existing security systems, providing compatibility without compromising overall security.

Assa Electric Lock employs advanced encryption technologies to safeguard user data and access control commands. With encryption protocols in place, users can be confident that their security information is protected from unauthorized access. The lock also includes an audit trail feature, which logs entry and exit events, allowing property owners to track access history easily.

In addition to its electronic capabilities, Assa Electric Lock prioritizes user-friendly design. The intuitive interface and installation process make it accessible to both professional installers and DIY enthusiasts. Furthermore, the lock is equipped with a backup key option, ensuring that users can always access their property in the event of a power failure or technical issues.

The lock's energy efficiency is another key characteristic, as it operates on low power consumption without sacrificing performance. This commitment to sustainability not only reduces costs but also minimizes the environmental impact.

Overall, the Assa Electric Lock stands out in the evolving landscape of security technology. It combines traditional reliability with modern electronic features, making it an ideal choice for those seeking enhanced security solutions. With its range of access options, robust materials, advanced encryption, and user-friendly design, the Assa Electric Lock is leading the way in secure access control.