LG Electronics L8004RY4, HB8004RA4, HB8004RB4, M1004R, M8004RY4, HB1004R Power Cord, Motor

Disassembly

10.Power Cord

1.Remove the control box. (Refer to section 3)

2. Open the top cover from the control box. (Refer to section 9)

3. Disconnect the front panel from the control box. (See Figure 22)

4. Disconnect two leads from the capacitor and relay.

5. Pull out the power cord.

6. Re-install the component by referring to the above removal procedure, above.

(Use only one ground-marked hole for ground connection.)

7.If the supply cord of this appliance is damaged, it must be replaced by the special cord.

(The special cord means the cord which has the

same specification marked on the supply cord attached at the unit.)

Figure 22

11. Motor

1. Remove the cabinet. (Refer to section 2)

2. Remove the turbo fan. (Refer to section 4)

3. Remove the fan. (Refer to section 5)

4. Remove the 4 screws that fasten the motor from the air guide. (See Figure 23)

5. Remove the motor.

6. Re-install the components by referring to the removal procedure, above.(See Figure 23)

Figure 23

16Room Air Conditioner