Installation
BEFORE INSTALLATION
1.Insert the guide panels into the guides of the air conditioner. Fasten the curtains to the unit with screws (TYPE A) as shown Figure. 5.
2.Cut the
Remove the backing from the seal strip and attach the seal strip to the underside of the bottom window. (Figure. 6)
NOW START INSTALLATION
1. LOCATING UNIT IN WINDOW
Open the window and mark center line on the center of the inner sill, as shown in Figure. 6.
Type A
Type A
Figure 5
SEAL STRIP 
(TYPE D)
2.ATTACH L BRACKET
a.Install the L brackets behind the inner window sill, with the short side of bracket as shown.
Use the 2 screws (TYPE A) provided.
b.The bracket helps to hold unit securely in place. Be sure to place bracket edge flush against back of inner sill. See Figure. 7.
Figure 6
INNER SILL
ROOM SIDE
CENTER LINE
CAUTION: During the following step, hold unit firmly until window sash is lowered to top
channel behind side panel frames. Personal injury or property damage may result if unit falls from window.
3.INSTALL THE AIR CONDITIONER IN THE WINDOW
a.Carefully lift the air conditioner and slide it into the open window. Make sure the bottom guide of the air condition- er drops into the notches of the
L bracket. See Figure. 8.
IMPORTANT :
When the air conditioner drops into the L bracket, the air con- ditioner will be centered in window opening as shown in Figure. 9.
b. While steadying the air conditioner, carefully bring the window sash down behind the upper guide of the air con- ditioner, as shown in Figure. 10.
Figure 7 |
|
|
| INNER SILL | |
OUTER SILL | TYPE A INSIDE | |
|
| CENTER LINE |
|
| 8" |
SHORT SIDE | 8" | |
| OUTSIDE |
|
Figure 8 | L BRACKET | |
|
| |
C enter Line
Figure 9
WINDOW FRAME 
UPPER GUIDE 
SEAL
ABOUT 1/4"
BOTTOM
GUIDE
Figure 10 | L BRACKET |
|
10Room Air Conditioner