LG Electronics EN 61000-2, EN 61000-3 Norm) owner manual 2nd F operation, Button is pressed again

Page 20

Operating Instruction

2nd F operation

1

Press the Start/Stop button.

The unit will respond with

a beep.

2

Open the door of the remote controller and press the 2nd

Function button to operate functions printed blue color under

buttons.

(Check the indication of 2nd function on the display of the remote controller.)

CANCEL

ONOFF SET

AUTO CLEAN

3

2nd function disappears in a short time automatically or when

the button is pressed again.

For more details, refer to functions next pages.

20Room Air Conditioner

Image 20
Contents Room Air Conditioner Table of Contents Be sure not to do Be sure to follow the instruction Safety PrecautionsDo not use damaged power cords, plugs, or a loose socket Do not allow water to run into electric part Do not handle the pipe by yourselfCostomerUse a dedicated outlet for this appliance Appliances near the power CablePerforming cleaning or Used for a long time Maintenance Unplug the appliance beforeThere is risk of fire or electrical shock Low refrigerant levels may cause product failureAvoid personal injury This could damage your healthProduct There is risk of personal injuryReplace all the batteries in the remote Be careful and avoid personal injuryThere is risk of fire or explosion They may burn or explodeCleaning And Maintenance ServicePrior To Operation Preparing For OperationSymbols Used In This Manual FeaturesIntroduction IndoorElectrical Safety Operating Instruction How To Insert The BatteriesStorage And Tips For Using The Remote Controler Remote Control Operations ControlsCooling operation Gentle Breeze by the Chaos logicAuto operation During Auto OperationHealthy dehumidification operation During Healthy Dehumidification OperationClose the door of the remote controller Temperature can be set within a rangeRemote controller still closed. You can Heating operation Heat pump model onlyJet cool operation Or orNEO Plasma purification operationOptional NEO Plasma Air Purifying Operation only2nd F operation Button is pressed againAdditional Features Sleep modeSetting the time Delay start/Pre-set stopTo adjust left/rightHorizontal Airflow direction Vertical Airflow Direction ControlTest operation Auto clean OptionalForced operation To disable function To enable functionDisplay Luminosity Optional Auto restartMaintenance And Service Indoor UnitBefore calling for service Air does not feel cold enough on the cooling settingAir conditioner does not operate Side Air intake vents Air outlet vents Rear PipingTroubleshooting Air conditioner may be operating abnormally whenAir conditioner does not start Fuse is blown/circuit breaker is trippedMemo No A20434L
Related manuals
Manual 28 pages 56.67 Kb

EN 61000-3 Norm), EN 61000-2 specifications

LG Electronics is committed to delivering cutting-edge technology while ensuring compliance with international standards. Among these standards are the EN 61000-2 and EN 61000-3 norms, which address electromagnetic compatibility (EMC) and are critical in defining how electrical and electronic devices interact with their electromagnetic environment.

EN 61000-2 focuses on the environment within which devices operate. This standard outlines the general requirements for the compatibility of various electrical devices in residential, commercial, and industrial environments. It specifies the necessary electromagnetic interference (EMI) levels to protect devices from disturbances that could impact their functionality. For LG Electronics, adherence to EN 61000-2 means engineering products that minimize the potential for EMI disruptions, thereby ensuring reliable performance in diverse settings.

On the other hand, EN 61000-3 addresses the emission limits for harmonic currents in electrical systems and equipment. It focuses on ensuring that devices do not generate excessive current harmonics that could disrupt the normal operation of other equipment. For LG, compliance with EN 61000-3 involves implementing technologies that reduce harmonic distortion, which improves the overall power quality in electrical systems. This aspect is particularly important for ensuring energy efficiency and enhancing the longevity of both LG products and the systems they are integrated into.

One of the main features of LG’s products that adhere to these standards is the incorporation of advanced filtering technologies. These filters are designed to suppress harmful electromagnetic emissions and ensure that devices operate within permissible limits. Furthermore, LG employs superior circuit designs that prioritize efficient power management, helping to minimize harmonic generation.

Moreover, LG’s commitment to sustainability is reflected in its adherence to these norms. By reducing electromagnetic emissions and improving power quality, LG Electronics not only complies with regulations but also contributes to a greener environment. This aligns with the company’s broader vision of producing environmentally friendly and energy-efficient products.

In summary, LG Electronics continuously invests in technologies that ensure compliance with EN 61000-2 and EN 61000-3 norms. Through advanced filtering solutions and efficient circuit designs, the company demonstrates its dedication to electromagnetic compatibility, reliability, and sustainability, reinforcing its position as a leader in the global electronics market.