Auto Operation

Operating Instructions

1 Press the Start/Stop button. The unit will respond with beep sound.

ENGLISH

2 Open the door on the Remote Controller. To select Auto Operation, press the Operation Mode Selection button. Each time the button is pressed, the operation mode is shifted in the direction of the arrow.

Cooling	Auto	Healthy	Heating
		Dehumidification	(Heat pump model only)

(Cooling Only	(Heat Pump
model)	model)

The temperature and fan speed are automatically set by the

3 electronic controls based on the actual room temperature. If you want to change the set temperature, press the Room Temperature Setting buttons. The set temperature will be changed considering room temperature.

To raise the temperature

To lower the temperature

DURING AUTO OPERATION:

❏You cannot switch the indoor fan speed. It has already been set by the Fuzzy rule.

❏If the system is not operating as desired, manually switch to another mode. The system will not automatically switch from the cooling mode to the heating mode, or from heating to cooling, then you must set the mode and the desired temperature again.

❏During Auto Operation, pressing the chaos swing button makes the horizontal louvers swing up and down automatically. If you want to stop auto-swing, press the chaos swing button again.

Owner's Manual 13

EN 61000-3, EN 61000-3 NORM specifications

LG Electronics has consistently been at the forefront of technological innovation, and its commitment to compliance with international standards is evident in its adherence to EN 61000-3 norms. The EN 61000-3 series focuses on electromagnetic compatibility (EMC) concerning emissions and immunity, particularly in residential, commercial, and light-industrial environments. This standard is critical for ensuring that electronic devices do not generate excessive electromagnetic interference (EMI), while also ensuring their proper functioning in the presence of such interference from other devices.

One of the main features of the EN 61000-3 standard is the regulation of harmonic emissions. Devices must limit the levels of harmonic currents they introduce into the power system. This requirement is crucial for maintaining the integrity of electrical networks and preventing issues that could arise from harmonics such as overheating and equipment failures. LG Electronics ensures that its products, including appliances and electronic devices, are designed to stay within the specified limits of the norm, thereby promoting energy efficiency and longevity.

Another characteristic of the EN 61000-3 standard is its focus on voltage fluctuations and flicker. Voltage fluctuations can lead to flickering lights and other undesirable effects. By adhering to these requirements, LG Electronics demonstrates its dedication to providing products that enhance user experience and reduce discomfort. This is especially critical in environments where stable power supply is essential, such as in home theaters or professional audio setups.

In terms of technologies, LG incorporates advanced filtering techniques and power management systems in its devices to ensure compliance with the EN 61000-3 norms. These technologies help mitigate EMI and ensure that the devices operate effectively in varied electrical environments. Furthermore, LG's commitment to research and development allows the company to innovate continuously, ensuring that its future products will not only comply with current standards but also embrace ongoing changes in global regulations.

In conclusion, LG Electronics' adherence to the EN 61000-3 norms underscores its commitment to producing high-quality, reliable, and efficient electronic devices. By prioritizing harmonics control and mitigating voltage fluctuations, LG not only enhances user experience but also contributes to a sustainable future. Through ongoing technological advancements and compliance with stringent international standards, LG reinforces its position as a leader in the electronics industry.