LG Electronics EN 61000-3 NORM owner manual That water is drained away, Properly

Page 6

Safety Precautions

CAUTION

■Installation

Always check for gas (refrigerant) leakage after installation or repair of product.

•Low refrigerant levels may cause failure of product.

Install the drain hose to ensure

Keep level even when

that water is drained away

installing the product.

properly.

 

• A bad connection may cause

• To avoid vibration.

water leakage.

 

90°

Do not install the product where the noise or hot air from the outdoor unit could be offensive to the neighborhoods or damage property.

•It may cause a problem for your neighbors.

Use two or more people to lift and transport the product.

• Avoid personal injury.

Do not install the product where it will be exposed to sea wind (salt spray) directly.

•It may cause corrosion on the product. Corrosion, particularly on the condenser and evaporator fins, could cause product malfunction or inefficient operation.

■Operation

Do not expose the skin directly to cool air for long periods of time.

(Don't sit in the draft.)

• This could harm to your health.

Do not use the product for special purposes, such as preserving foods, works of art, etc. It is a consumer air conditioner, not a precision refrigeration system.

• There is risk of damage or loss of property.

6Room Air Conditioner

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Multi Type Air Conditioner EN 61000-2, EN 61000-3 NormTable of Contents Safety Precautions Do not modify or extend the power cable Be cautious when unpacking and installing the productBe sure the installation area does not deteriorate with age Contact an Authorized Power supply cable Service CenterFlooded or submerged Be cautious that water could not enter the productBad connection may cause To avoid vibration Water leakage That water is drained awayProperly Use two or more people to lift and transport the productDo not block the inlet or outlet of air flow Prior to operation Operating Instructions Remote ControllerStorage and Tips For Using the Remote Controller Standard TypeSignal Receptor Remote Control Operation Signal transmitterCooling Model , Heat Pump Model Set the temperature lower than the room temperature Cooling OperationTemperature and fan speed are automatically set by Auto OperationFan speed mode is shifted Healthy Dehumidification OperationSound Beep sound Temperature can be set within a rangeHeating OperationHeat pump model only Of16C~30C60F~86F in 1C2FUnit will operate in high fan speed in cooling/heating mode Jet CoolOr or NEO Plasma Purification OperationOptional Plasma Air Purifying Operation only2nd F Operation For more details, refer to functions nextSetting the Time Additional featuresSleep Mode Delay Start/Pre-Set StopVertical Airflow Direction Control Standard, Artcool Mirror TypeAir Circulation Mode Horizontal Airflow Direction Control OptionalHelpful information Forced OperationAuto restart Fan speed and cooling capacityRe-install the NEO Plasma filter to the original position Maintenance and ServiceGrille, Case, and Remote Control Standard Type Indoor UnitReplacement of purifying filter Optional Cleaning of Purifying Filter Do not overcool the room Keep blinds or curtains When the air conditioner is to be used againClean the air filter regularly Closed UniformTroubleshooting Case Explanation See
Related manuals
Manual 28 pages 56.67 Kb

EN 61000-3, EN 61000-3 NORM specifications

LG Electronics has consistently been at the forefront of technological innovation, and its commitment to compliance with international standards is evident in its adherence to EN 61000-3 norms. The EN 61000-3 series focuses on electromagnetic compatibility (EMC) concerning emissions and immunity, particularly in residential, commercial, and light-industrial environments. This standard is critical for ensuring that electronic devices do not generate excessive electromagnetic interference (EMI), while also ensuring their proper functioning in the presence of such interference from other devices.

One of the main features of the EN 61000-3 standard is the regulation of harmonic emissions. Devices must limit the levels of harmonic currents they introduce into the power system. This requirement is crucial for maintaining the integrity of electrical networks and preventing issues that could arise from harmonics such as overheating and equipment failures. LG Electronics ensures that its products, including appliances and electronic devices, are designed to stay within the specified limits of the norm, thereby promoting energy efficiency and longevity.

Another characteristic of the EN 61000-3 standard is its focus on voltage fluctuations and flicker. Voltage fluctuations can lead to flickering lights and other undesirable effects. By adhering to these requirements, LG Electronics demonstrates its dedication to providing products that enhance user experience and reduce discomfort. This is especially critical in environments where stable power supply is essential, such as in home theaters or professional audio setups.

In terms of technologies, LG incorporates advanced filtering techniques and power management systems in its devices to ensure compliance with the EN 61000-3 norms. These technologies help mitigate EMI and ensure that the devices operate effectively in varied electrical environments. Furthermore, LG's commitment to research and development allows the company to innovate continuously, ensuring that its future products will not only comply with current standards but also embrace ongoing changes in global regulations.

In conclusion, LG Electronics' adherence to the EN 61000-3 norms underscores its commitment to producing high-quality, reliable, and efficient electronic devices. By prioritizing harmonics control and mitigating voltage fluctuations, LG not only enhances user experience but also contributes to a sustainable future. Through ongoing technological advancements and compliance with stringent international standards, LG reinforces its position as a leader in the electronics industry.
Top Page Image Contents