LG Electronics EN 61000-3 NORM owner manual Additional features, Sleep Mode, Setting the Time

Page 19

Additional features

Additional features

Sleep Mode

1. Press the Sleep Mode Auto button to set the time you want the unit to turn off automatically.

2.The Timer is programmed in one-hour increments by pressing the Sleep Mode Auto button 1 to 7 times.

The sleep mode is available for 1 to 7 times. To alter the time period in steps of 1 hour, press the Sleep Mode Button while aiming at air conditioner.

3.Make sure the Sleep Mode Auto LED lights up.

Setting the Time

1.Time can be set only when you have pressed the Reset button. If you have just replaced the batteries,

the Reset button should be pressed to reset the time.

Press the Start/Stop button.

To cancel the Sleep Mode, press the sleep Mode Auto button several times until the star ( ) disappears from the operation display.

NOTICE The Sleep Mode will be operated at low fan speed (cooling) or medium fan speed (heat pump only) for quiet sleeping.

IN COOLING MODE: The temperature will automatically rise by 1°C (2°F) over the next 30 minutes and by 2°C (4°F) in 1 hour for comfortable sleeping.

2.

Press the Time Setting buttons until the desired time

 

is set.

 

 

 

CANCEL

3.

Press the Timer SET button.

SET

ENGLISH

NOTICE Check the indicator for A.M. and P.M.

Delay Start/Pre-Set Stop

1.Make sure the time is set correctly on the Remote Controller display.

2. Press the ON/OFF Timer

ON OFF

buttons to turn Timer on or off.

 

3. Press the Time Setting buttons until the desired time is set.

4. Press the selected on/off setting by

SET

 

pressing the Timer SET button while

 

aiming the Remote Controller at the

 

signal receptor.

 

To cancel the setting the timer.

CANCEL Press the Timer Cancel button while aiming Remote Controller at the signal receptor. (The timer lamp on the air conditioner and the display will go out.)

NOTICE Select one of the following four types of operation.

with the unit running

 

 

 

Delay OFF Timer

Delay ON Timer

Delay OFF and ON Timer Delay ON and OFF Timer

Owner's Manual 19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents EN 61000-2, EN 61000-3 Norm Multi Type Air ConditionerTable of Contents Safety Precautions Be cautious when unpacking and installing the product Do not modify or extend the power cableBe sure the installation area does not deteriorate with age Be cautious that water could not enter the product Power supply cable Service CenterFlooded or submerged Contact an AuthorizedUse two or more people to lift and transport the product That water is drained awayProperly Bad connection may cause To avoid vibration Water leakageDo not block the inlet or outlet of air flow Prior to operation Standard Type Remote ControllerStorage and Tips For Using the Remote Controller Operating InstructionsSignal Receptor Signal transmitter Remote Control OperationCooling Model , Heat Pump Model Cooling Operation Set the temperature lower than the room temperatureAuto Operation Temperature and fan speed are automatically set byHealthy Dehumidification Operation Fan speed mode is shiftedSound Of16C~30C60F~86F in 1C2F Temperature can be set within a rangeHeating OperationHeat pump model only Beep soundJet Cool Unit will operate in high fan speed in cooling/heating modeOr or Plasma Air Purifying Operation only NEO Plasma Purification OperationOptionalFor more details, refer to functions next 2nd F OperationDelay Start/Pre-Set Stop Additional featuresSleep Mode Setting the TimeStandard, Artcool Mirror Type Vertical Airflow Direction ControlHorizontal Airflow Direction Control Optional Air Circulation ModeFan speed and cooling capacity Forced OperationAuto restart Helpful informationStandard Type Indoor Unit Maintenance and ServiceGrille, Case, and Remote Control Re-install the NEO Plasma filter to the original positionReplacement of purifying filter Optional Cleaning of Purifying Filter Closed Uniform When the air conditioner is to be used againClean the air filter regularly Do not overcool the room Keep blinds or curtainsCase Explanation See Troubleshooting
Related manuals
Manual 28 pages 56.67 Kb

EN 61000-3, EN 61000-3 NORM specifications

LG Electronics has consistently been at the forefront of technological innovation, and its commitment to compliance with international standards is evident in its adherence to EN 61000-3 norms. The EN 61000-3 series focuses on electromagnetic compatibility (EMC) concerning emissions and immunity, particularly in residential, commercial, and light-industrial environments. This standard is critical for ensuring that electronic devices do not generate excessive electromagnetic interference (EMI), while also ensuring their proper functioning in the presence of such interference from other devices.

One of the main features of the EN 61000-3 standard is the regulation of harmonic emissions. Devices must limit the levels of harmonic currents they introduce into the power system. This requirement is crucial for maintaining the integrity of electrical networks and preventing issues that could arise from harmonics such as overheating and equipment failures. LG Electronics ensures that its products, including appliances and electronic devices, are designed to stay within the specified limits of the norm, thereby promoting energy efficiency and longevity.

Another characteristic of the EN 61000-3 standard is its focus on voltage fluctuations and flicker. Voltage fluctuations can lead to flickering lights and other undesirable effects. By adhering to these requirements, LG Electronics demonstrates its dedication to providing products that enhance user experience and reduce discomfort. This is especially critical in environments where stable power supply is essential, such as in home theaters or professional audio setups.

In terms of technologies, LG incorporates advanced filtering techniques and power management systems in its devices to ensure compliance with the EN 61000-3 norms. These technologies help mitigate EMI and ensure that the devices operate effectively in varied electrical environments. Furthermore, LG's commitment to research and development allows the company to innovate continuously, ensuring that its future products will not only comply with current standards but also embrace ongoing changes in global regulations.

In conclusion, LG Electronics' adherence to the EN 61000-3 norms underscores its commitment to producing high-quality, reliable, and efficient electronic devices. By prioritizing harmonics control and mitigating voltage fluctuations, LG not only enhances user experience but also contributes to a sustainable future. Through ongoing technological advancements and compliance with stringent international standards, LG reinforces its position as a leader in the electronics industry.
Top Page Image Contents