LG Electronics 2800HT operation manual Servicing Glass, Replacing Glass, Cleaning Blowers

Page 17

MAINTENANCE

DOOR GASKET

A spun fiberglass gasket (3/4" [19 mm] in diameter) pro- vides the seal around the fuel door. Should this become frayed or damaged it should be replaced. Spun fiberglass "rope" gasketing can be purchased from your dealer. It must be the same diameter as the original. Use high temperature silicone sealer as an adhesive, which can also be purchased from your dealer.

WARNING! THE GASKETS MUST BE KEPT IN GOOD CONDITION. DO NOT LEAVE THE STOVE BURNING WITH THE DOOR OPEN OR AJAR (OTHER THAN START UP AND REFUELING AS DEFINED IN THIS MANUAL). THIS WILL CAUSE EXCESSIVE HEAT BUILD UP IN THE APPLIANCE AND COULD IGNITE SURROUNDING COMBUSTIBLES AS WELL AS DAM- AGE THE STOVE BY OVERFIRING IT. OVERFIRING IS A CONDITION WHERE EXCESSIVE TEMPERA- TURES ARE REACHED, BEYOND THE DESIGN CA- PABILITIES OF THE STOVE (SUCH DAMAGE IS NOT COVERED BY THE MANUFACTURER'S WARRANTY).

SERVICING GLASS

CAUTION: BE CAREFUL NOT TO ABUSE DOOR AS- SEMBLY BY STRIKING OR SLAMMING IT. IF THE DOOR ASSEMBLY OR GLASS IS BROKEN OR DAM- AGED, THEY MUST BE REPLACED BEFORE HEATER CAN BE SAFELY OPERATED. USE ONLY COMPONENTS PROVIDED BY THE MANUFAC- TURER AS REPLACEMENT PARTS.

Cleaning Glass: Ensure stove is cold prior to cleaning glass. A commercial glass cleaner designed for stoves is recommended. Do not use abrasive cleaners.

Replacing Glass:

1.Remove door from stove by lifting door up and off hinge pins: Place the door on a flat protected (towel) clean flat surface with the inside of the door facing up. Remove the glass clips (by removing screws holding clips), then carefully remove broken glass one piece at a time (protective gloves are recommended).

2.Clean area where the glass with gasket will be in- stalled.

3.Install new glass with gasket (use only factory 5-mm glass with glass channel gasket. Do not substitute). Carefully reinstall glass clips. Be very careful not to overtighten screws.

4.Reinstall door.

CLEANING BLOWERS

The blowers require inspection and cleaning annually to remove lint, dust, etc. If there are pets in the dwelling, the blowers should be cleaned at least twice a year To ac- cess, remove blower covers (remove the two ¼” [7 mm] hex head screws on each panel), then inspect propellers (replace if cracked, broken or melted) and vacuum out lint, dust, and debris.

CREOSOTE FORMATION AND NEED FOR REMOVAL What is Creosote - When wood is burned slowly, it pro- duces tar and other organic vapors, which combine with expelled moisture to form creosote. The creosote vapors condense in the relatively cool chimney flue of a slow- burning fire. As a result, creosote residue accumulates on the flue lining. When ignited this creosote makes an extremely hot fire. Also, creosote deposits tend to form in long runs of venting where gases become too cool prior to exhausting. Note: Single wall pipe cools rapidly, there- fore installations using this type of flue are more suscep- tible to creosote deposits.

To inhibit the build up of creosote, adjust the primary air control to a medium-high or high setting for a 10-minute period each day. Do not attempt to burn out heavy creo- sote accumulations in this manner. This must be re- moved from the chimney by scraping or brushing to re- duce the risk of a chimney fire.

Burn Approved Fuel Only - This stove is approved for burning dry seasoned natural wood only. Using green or inadequately seasoned wood may increase creosote buildup.

Removal of Fireplace Insert for Inspection:

Pull Fireplace insert forward until the screws securing the flue connection can be accessed. Detach flue by remov- ing screws. Pull unit forward and out of fireplace. Inspect the chimney and chimney connector as follows:

Inspection Frequency - The chimney connector and chimney should be inspected at least twice monthly dur- ing the heating season to determine if a creosote buildup has occurred. If creosote has accumulated it should be removed to reduce the risk of a chimney fire.

To reinstall insert follow instructions on pages 9 and 10 (instructions # 8 through 12).

PAGE 17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents 775004M, Rev. J, 11/03 Installation and Operation ManualImportant Warnings Table of Contents Smoke Detectors Planning Your InstallationHearth Protection Chimney InspectionProvide Adequate AIR for Combustion ClearancesDraft Requirements Factory Built Fireplaces Factory Built Fireplace InstallationNot Approved In Canada Venting Requirements for factory built fireplaceMetal Tag Masonry FireplacesInstallation Installation Steps Power Cord ChangeoverBaffle Plate MarbleWrong CorrectSurround Assembly Positive Flue Connection for Masonry Product Features and ControlsBlower System Primary AIR ControlCare and Operation AIR Draft Controls HOW to Start and Maintain a FireStart-Up Air Control RefuelingWiring Diagram Power Flow Diagram Fuel MaintenanceServicing Glass Cleaning BlowersReplacing Glass Removal of Fireplace Insert for InspectionReinstall Baffle Plate Cleaning / Removing Baffle Plate To remove, locateTroubleshooting Overfiring Damage 63% Gph Lbs kg Manual Cfm total Dimensions shown are approximations only +/- ¼ 6.4 mmBTU Description Replacement Parts List Model 2800HTReplacement Parts List Model 2800HT Component Diagrams Model 2800HT Offset Adapter SAFETY/LISTING LabelActual Appearance Masonry Fireplace Kit Zero Clearance KitSAFETY/LISTING Label EPA Label Ownership Records Service and Maintenance LOGWest Taft Avenue Orange, CA

2800HT specifications

The LG Electronics 2800HT is a versatile and advanced home entertainment system that caters to the modern consumer's desire for high-quality audio and video output. Designed with cutting-edge technology, the 2800HT is particularly popular for its immersive sound and exceptional picture quality, making it a top choice for movie enthusiasts and gamers alike.

One of the standout features of the 2800HT is its 4K Ultra HD resolution, delivering stunningly sharp images with vibrant colors and lifelike detail. This system is equipped with HDR (High Dynamic Range) technology, which enhances the contrast between the brightest and darkest areas of the screen. This results in a picture that not only looks more realistic but also provides a more captivating viewing experience, whether you're streaming content or watching Blu-ray discs.

The audio capabilities of the 2800HT are equally impressive, featuring a powerful surround sound system that envelops you in a rich audio landscape. With Dolby Atmos support, the system allows sound to move around you in three-dimensional space, creating an auditory experience that is as immersive as the visuals. This makes it ideal for enjoying action-packed films or engaging in intense gaming sessions.

Additional features include built-in smart technology, which allows users to access popular streaming services directly from the device. With Wi-Fi connectivity, the 2800HT can easily connect to the internet, ensuring a seamless experience while browsing for content. The intuitive user interface makes navigation simple, enhancing user experience across various platforms.

Moreover, the LG 2800HT is designed with sleek aesthetics that allow it to blend seamlessly into any home décor. Its compact size does not compromise performance, making it a great option for smaller spaces. The system also includes multiple HDMI and USB ports for connecting additional devices, ensuring compatibility with a wide range of gadgets.

In conclusion, the LG Electronics 2800HT is more than just a home entertainment system; it represents the convergence of innovative technology and superior audio-visual quality. Whether for movie nights, gaming marathons, or streaming your favorite shows, the 2800HT is designed to elevate your entertainment experience to new heights, making it a worthy investment for any tech-savvy household.
Top Page Image Contents