Shark NV350UKMS manual Component Maintenance Schedule, Emptying the Dust CUP

Page 13

English

 

 

COMPONENT

MAINTENANCE SCHEDULE

 

1

Dust Cup

Empty each time you vacuum.

 

 

 

 

 

 

2

Pre-Motor Foam Filter

Rinse and air dry every 3 months under normal use.

 

 

 

 

 

 

3

Pre-Motor Felt Filter

Rinse and air dry every 3 months under normal use.

 

 

 

 

 

 

4

Post-Motor HEPA Filter

Clean once every 2 years or as needed.

 

 

 

 

 

Screen

Pre-Motor

Filter

Foam Filter

 

 

Felt Filter

 

Post-Motor

 

HEPA Filter

Fig. 20

Fig. 21

EMPTYING THE DUST CUP

The dust cup needs to be emptied each time you vacuum and periodically during cleaning, when the dust cup appears full.

1Undo the latches on the sides of the dust cup by lifting them up and outwards to remove the dust cup from the motor base. (Fig. 18)

2Hold the dust cup over a trash receptacle and press the bottom door release button. (Fig. 19) Tap gently to empty contents. Press the door shut again until it clicks.

3If needed, turn the dust cup upside down over the trash receptacle and press the top door release button. (Fig. 20) Tap gently to remove contents.

Use a dry cloth or paper towel to remove debris stuck to the screen filter inside the dust cup. Press the door shut again until it clicks.

4Replace the dust cup on top of the motor base. Hook the two latches onto the tabs on the sides of the dust cup and push down to lock.

NV350UKMS_26_IM_ENG_120906_1.indd 13

CLEANING THE PRE-MOTOR FILTERS

1Remove the dust cup.

2Pull the 2 filters out from the top of the motor base. (Fig. 21)

3Rinse the filters thoroughly in lukewarm water until the water runs clear.

DO NOT put the filter in the washing machine or dishwasher.

NOTE: The material in the filter will discolor over time. This is NORMAL and will not affect the performance of the filter.

4Squeeze out excess water and let air-dry for at least 24 hours before replacing. Do not use a hair dryer or other heating methods to dry.

5Place the felt filter in first, then the foam filter.

6Replace the dust cup.

HELP LINE: 0844 873 0728

13

12-09-06 2:59 PM

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Owner’s guide Important Safety Instructions Do not use without dust cup and/or filters in place Hose AttachmentsVoltage 220-240V~, 50/60Hz Watts 1200W NV350UKMSTECHNICAL SpecificationsContentsEnglish Accessory Holder Accessories Crevice ToolGetting Started Bristle Brush AttachmentDetachable Canister Modes Upright VACTo Assemble Mode 1 Upright VacPlace the floor nozzle on a level surface = OFF To USEMode 2 Detachable Canister Clean the Floor in Detachable Canister Mode Above-Floor CleaningStore Your Vacuum Safely StoringMaintenanceReassemble all parts securely before operating vacuum Do not operate the vacuum with WET filtersCleaning the PRE-MOTOR Filters Component Maintenance ScheduleEmptying the Dust CUP Cleaning the POST-MOTOR Hepa Filter Maintenance cont’dCleaning the Turbo Brush Ensure that all the filters are clean Cleaning the Motorized Floor BrushChecking for Blockages Dust cup may be full. Empty dust cupMotorized Floor Brush Troubleshooting Guide Help Line 0844 873 Help Line 0844 873 NV350UKMS

NV350UKMS specifications

The Shark NV350UKMS is a versatile upright vacuum cleaner designed to provide powerful cleaning capabilities for various surfaces. One of its standout features is the Shark anti-hair wrap technology, which is engineered to remove hair from the brush roll as you clean. This is particularly beneficial for homes with pets or long-haired individuals, as it reduces the annoying tangles that can decrease cleaning performance over time.

The NV350UKMS also incorporates the DuoClean technology, featuring two brush rolls that work together to clean carpets and hard floors seamlessly. The soft brush roll captures large debris, while the bristle brush roll removes embedded dirt. This dual-action cleaning system ensures that every corner of your home, from carpets to laminate floors, receives the attention it requires.

Additionally, the vacuum boasts a lightweight and flexible design, making it easy to maneuver around furniture and reach into tight spaces. The EZ Clean Dust Cup allows for easy emptying and cleaning, enabling users to maintain hygiene without getting their hands dirty. With a capacity of 1.1 liters, the dust cup minimizes the need for frequent emptying.

The Shark NV350UKMS is equipped with a range of accessories, including a crevice tool, dusting brush, and upholstery tool. These attachments enhance the cleaning versatility, allowing users to tackle various tasks such as cleaning stairs, curtains, and furniture. The vacuum also features a long power cord, providing an extended reach that reduces the need for frequently switching power outlets.

The vacuum cleaner's HEPA filtration system captures allergens and dust particles, making it an ideal choice for allergy sufferers. The washable filters contribute to its longevity and efficiency, ensuring that the vacuum maintains optimal performance over time.

In summary, the Shark NV350UKMS combines advanced technologies with user-friendly features to deliver a robust cleaning experience. Its anti-hair wrap technology, DuoClean system, and accessories cater to a variety of cleaning needs, ensuring a thorough clean on multiple surfaces, while its ergonomic design and easy maintenance make it a convenient choice for any household.
Top Page Image Contents