ASSEMBLY
C 
B
A
E
F
| D |
G | J |
| H |
| I |
| K |
b | fig. 2 |
| |
| c |
d
| a | Charging |
|
|
|
| |
|
| Charge | fig. 3 |
|
| Complete | |
fig. 1 |
| fig. 4 |
|
VACUUM COMPONENTS
AMain Body
BHandle
CScrew
DDust Cup
EDust Cup Release
FUpper Dust Cup Door Release
GLower Dust Cup Door Release
HMotorized Brush
IPower Button
JCharging Adapter
KCharging Base
TECHNICAL SPECIFICATIONS:
Volts: 14.4
ASSEMBLY
1Insert the vacuum body into the motorized brush. (fig. 1a)
2Insert the handle pole into the top of the main body. (fig. 1b)
3Use a screwdriver to secure the handle assembly in place with the bolt (included). (fig. 1c)
4Ensure that the dust cup is securely in place. (fig. 1d)
CHARGING
1The charge adapter plug will fit into the charging base only one way. Insert the charging adapter plug by aligning the arrow on the plug with the arrow next to the charging jack on the back of the charging base. (fig. 2)
2Place the vacuum on the charging base to charge. Charge the unit for 6 hours before using the vacuum for the first time. (fig. 3)
3This unit is equipped with a precision charger that monitors the batteries to ensure a full charge for every use and to extend the life of the batteries. Depending on usage, the time for a full charge is 3 to 6 hours.
4One half of the blue LED light around the power button will illuminate while the unit is charging. When the charge is complete, the complete oval will be illuminated. (fig. 4)
If the charging light does not illuminate, ensure that the charging adapter is plugged in properly to the wall outlet and to the back of the charging base. Also ensure that the unit is properly seated in the charging base.
4
TOLL FREE:
SV1100_ENG_110503_2.indd 4 |