CARE AND MAINTENANCE
fig. 6
fig. 8
fig. 5
fig. 7
CAUTION: Remove the unit from the charging stand before any servicing.
EMPTYING THE DUST CUP
To maintain the best performance of your vacuum, empty the dust cup after every use or as debris approaches the “MAX FILL” line. Never operate the vacuum without the dust cup and filter in place.
1Turn off the vacuum before removing the dust cup.
2Press down on the dust cup release button (fig. 5) and pull out the dust cup.
3Holding the carry handle, place the dust cup inside a trash receptacle and press the lower dust cup door release button. Gently tap the dust cup to dislodge and release dust and debris. (fig. 6)
Important: If the Dust Cup Door does not swing open after press- ing the release button, push the door open using the bottom door tabs.
4Snap the door back in place.
5If you notice hair or other debris wrapped around the metal screen in the upper chamber of the dust cup, press the upper dust cup door release to open the top of the dust cup. Lift out the metal screen, clear any debris and replace. Snap the door back into place. (fig. 7)
6Replace the dust cup by first seating the lower part of the dust cup, then pushing in the top part until it clicks. (fig. 8)
6
TOLL FREE:
SV1100_ENG_110503_2.indd 6 |