Shark MV3010 manual Component Maintenance Schedule, To Clean the PRE-MOTOR Filters

Page 10

Vacuum Mode - cont.

 

 

COMPONENT

MAINTENANCE SCHEDULE

 

 

 

 

 

 

1

Dust Cup

Empty each time you vacuum.

 

 

 

 

 

 

2

Pre-Motor Foam Filters

Rinse and air dry every month under normal use.

 

 

 

 

 

 

3

Post-Motor HEPA Filter

Clean once every 12 months under normal use.

 

NOTE: The material in the filters will discolor over time. This is NORMAL and will not affect the performance of the filters.

DO NOT operate the vacuum without ALL the filters in place.

DO NOT operate the vacuum with WET filters.

Always unplug the vacuum from the electrical outlet before doing any maintenance on the appliance.

Pre-Motor Filters

Thick Foam

Thin Foam

Fig. 15

Fig. 16

TO CLEAN THE PRE-MOTOR FILTERS

1Press the dust cup release button on the top of the unit. Pull the dust cup out of the unit by pulling forward on the handle.

2Remove the two foam filters from the unit.

(Fig. 15)

3Thoroughly rinse the two filters in lukewarm water. Squeeze out any excess water. (Fig. 16) Air dry for 24 hours before reusing.

DO NOT use a hair dryer or any other forced hot air to dry the filter.

4Insert a dry filter set into the unit. The order of the filters impacts your dust cup performance. Make sure the thick filter is on the top and the thin filter is on the bottom.

Post Motor Filter

Hepa Filter

Fig. 18

Fig. 17

Fig. 19

TO CLEAN THE POST-MOTOR HEPA FILTER

1To release the vacuum nozzle, press the top “nozzle release” button first and then lift up on the main body. (Fig. 17)

2Lift the HEPA filter out from the vacuum nozzle.

(Fig. 18)

3Thoroughly rinse the filter in lukewarm water. (Fig. 19) Air dry for 24 hours before reusing.

DO NOT use a hair dryer or any other forced hot air to dry the filter.

4Once it is thoroughly dry, replace the HEPA filter into the vacuum nozzle.

NOTE: Any other servicing should be performed by an authorized service representative.

6

TOLL FREE: 1-800-798-7398

MV3010_40_ENG_IB_120703_1.indd 6

12-07-03 9:15 AM

Page 9 Page 11
Image 10
Page 9 Page 11
Contents MV3010 Important Safety Instructions Use only as described in this manualAttempt to Defeat This Safety Feature Do not run the cleaning unit over large- sized objectsPolarized Plug This Book Covers Model Number Technical SpecificationsSteam Technology MV3010Contents Vacuum Mode Getting StartedAssembly Vacuum Mode AssemblyAttaching the Vacuum Nozzle Using the Accessories Vacuum ModeUsing Vacuum Mode To return to standby mode, step on the pedal once moreEmptying the Dust CUP Never OVER-FILL the Dust CUPEmptying the Dust Screen To Clean the POST-MOTOR Hepa Filter Component Maintenance ScheduleTo Clean the PRE-MOTOR Filters Remove the two foam filters from the unitTo Reset the Motor Thermostat Vacuum Mode StorageCleaning the Vacuum Nozzle Checking for BlockagesAssembly Steam Mode Steam Mode AssemblyChanging to Steam Mode Filling the Water TankSteam Mode Using Steam ModeStone Sanitize floors Laminate Light cleaning and dustingMarble Remove spots and smaller messes Tile Tile Messes and stainsCare of Your MULTI-PURPOSE Cleaning PAD Steam Mode StorageTilt the cleaning unit back to the upright position StorageTroubleshooting Guide Vac-OR-Steamwill notPart Ordering PartsFoam & Hepa Filters XFF3010 Multi-purpose Steam Pad Toll Free EURO-PRO Three 3 Years Limited Warranty Product RegistrationCan

MV3010 specifications

The Shark MV3010 is a versatile and innovative cleaning system that redefines home cleaning efficiency. Combining advanced technologies with user-friendly design, this vacuum cleaner is ideal for tackling a wide range of surfaces, from carpets to hard floors.

One of the standout features of the Shark MV3010 is its powerful suction. Equipped with a high-efficiency motor, it effortlessly lifts dirt and debris, ensuring a thorough clean every time. This model also incorporates an advanced anti-hair wrap technology, specifically designed to prevent hair from tangling around the brush roll. This is particularly beneficial for pet owners, as it significantly reduces maintenance time and enhances the overall cleaning experience.

Another key characteristic of the MV3010 is its lightweight and ergonomic design. Weighing only a few pounds, this vacuum cleaner is easy to maneuver around furniture and up and down stairs. The swivel steering allows for effortless navigation, making it suitable for various home environments. In addition, the MV3010 features a detachable handheld unit that provides added versatility for above-floor cleaning. This makes it perfect for cleaning upholstery, stairs, and even vehicles.

The Shark MV3010 also comes equipped with a washable foam filter, which helps to capture allergens and fine dust particles, promoting a healthier home environment. The easy-to-access dust cup is another thoughtful addition; it allows for quick emptying and cleaning, minimizing contact with dirt and debris. The vacuum's large capacity dust cup means fewer trips to the trash can, making cleaning more efficient.

For added convenience, the MV3010 includes a variety of attachments, such as a crevice tool and upholstery tool, allowing users to customize their cleaning approach based on their specific needs. The vacuum is designed for easy storage, with its compact size enabling it to fit into tight spaces.

In conclusion, the Shark MV3010 stands out as a top-performing vacuum cleaner with its powerful suction, advanced hair management technology, lightweight design, and versatile capabilities. Whether you are a pet owner, have children, or simply want an efficient cleaning solution, the MV3010 offers everything you need for a cleaner, healthier home.
Top Page Image Contents