Shark MV3010 manual Steam Mode Assembly, Changing to Steam Mode, Assembly Steam Mode

Page 12

Steam Mode: Assembly

Always unplug the vacuum from the electrical outlet before changing cleaning nozzles.

Fig. 24

The Vac-OR-Steam™, is a complete

bare-floor and carpet cleaning system. The steam nozzle also sanitizes bare floors.

Do not use chemicals or detergents in your Vac-OR-Steam™. You only need water to achieve super-heated, sanitizing steam.

Fig. 25

Fig. 27

Fig. 28

Fig. 26

CHANGING TO STEAM MODE

1To release the vacuum nozzle and change to the steam nozzle, press the top “nozzle release” button. (Fig. 24) Lift the main body up and the vacuum nozzle will be released. You may need to apply gentle pressure to the nozzle head with your foot to separate the two parts.

ASSEMBLY STEAM MODE

1Place the main unit on top of the steam nozzle and press down to make sure that the steam nozzle is firmly secure to the main body.

(Fig. 25) You will hear an audible click when the two parts are attached correctly.

IMPORTANT: Steam nozzle head and multi- purpose steam pad must be attached to the cleaning unit in order to use the steam function.

2Place the multi-purpose steam pad on the floor and position the steam nozzle over it. (Fig. 26)

IMPORTANT: Make sure the steam nozzle head is well secured to the main body by lifting up on the unit before use.

FILLING THE WATER TANK

1Before use, make sure to fill the water tank. To fill the water into the steam nozzle head, turn the water fill cap counterclockwise to open.

(Fig. 27)

2Use the filling flask and pour water into the tank. (Fig. 28) Do not overfill. Replace the cap on the water tank by turning cap clockwise and tightening.

QUICK TIP: The steam nozzle head can be filled with water before or after it is attached to the main body of the unit.

NOTE: If you live in a hard water area, we recommend using distilled water in your Vac- OR-Steam™.

AVOIDING DECALCIFICATION YOUR STEAM MOP

Calcium and mineral deposits can build up and impact the performance of your Vac-OR- Steam™ over time. To extend the life of your product we recommend that you use distilled water.

8

TOLL FREE: 1-800-798-7398

MV3010_40_ENG_IB_120703_1.indd 8

12-07-03 9:16 AM

Page 11 Page 13
Image 12
Page 11 Page 13
Contents MV3010 Important Safety Instructions Use only as described in this manualDo not run the cleaning unit over large- sized objects Attempt to Defeat This Safety FeaturePolarized Plug Technical Specifications Steam TechnologyThis Book Covers Model Number MV3010Contents Vacuum Mode Getting StartedVacuum Mode Assembly AssemblyAttaching the Vacuum Nozzle Vacuum Mode Using Vacuum ModeUsing the Accessories To return to standby mode, step on the pedal once moreNever OVER-FILL the Dust CUP Emptying the Dust CUPEmptying the Dust Screen Component Maintenance Schedule To Clean the PRE-MOTOR FiltersTo Clean the POST-MOTOR Hepa Filter Remove the two foam filters from the unitVacuum Mode Storage Cleaning the Vacuum NozzleTo Reset the Motor Thermostat Checking for BlockagesSteam Mode Assembly Changing to Steam ModeAssembly Steam Mode Filling the Water TankSteam Mode Using Steam ModeLaminate Light cleaning and dusting Marble Remove spots and smaller messes TileStone Sanitize floors Tile Messes and stainsSteam Mode Storage Tilt the cleaning unit back to the upright positionCare of Your MULTI-PURPOSE Cleaning PAD StorageTroubleshooting Guide Vac-OR-Steamwill notOrdering Parts PartFoam & Hepa Filters XFF3010 Multi-purpose Steam Pad Toll Free EURO-PRO Three 3 Years Limited Warranty Product RegistrationCan

MV3010 specifications

The Shark MV3010 is a versatile and innovative cleaning system that redefines home cleaning efficiency. Combining advanced technologies with user-friendly design, this vacuum cleaner is ideal for tackling a wide range of surfaces, from carpets to hard floors.

One of the standout features of the Shark MV3010 is its powerful suction. Equipped with a high-efficiency motor, it effortlessly lifts dirt and debris, ensuring a thorough clean every time. This model also incorporates an advanced anti-hair wrap technology, specifically designed to prevent hair from tangling around the brush roll. This is particularly beneficial for pet owners, as it significantly reduces maintenance time and enhances the overall cleaning experience.

Another key characteristic of the MV3010 is its lightweight and ergonomic design. Weighing only a few pounds, this vacuum cleaner is easy to maneuver around furniture and up and down stairs. The swivel steering allows for effortless navigation, making it suitable for various home environments. In addition, the MV3010 features a detachable handheld unit that provides added versatility for above-floor cleaning. This makes it perfect for cleaning upholstery, stairs, and even vehicles.

The Shark MV3010 also comes equipped with a washable foam filter, which helps to capture allergens and fine dust particles, promoting a healthier home environment. The easy-to-access dust cup is another thoughtful addition; it allows for quick emptying and cleaning, minimizing contact with dirt and debris. The vacuum's large capacity dust cup means fewer trips to the trash can, making cleaning more efficient.

For added convenience, the MV3010 includes a variety of attachments, such as a crevice tool and upholstery tool, allowing users to customize their cleaning approach based on their specific needs. The vacuum is designed for easy storage, with its compact size enabling it to fit into tight spaces.

In conclusion, the Shark MV3010 stands out as a top-performing vacuum cleaner with its powerful suction, advanced hair management technology, lightweight design, and versatile capabilities. Whether you are a pet owner, have children, or simply want an efficient cleaning solution, the MV3010 offers everything you need for a cleaner, healthier home.
Top Page Image Contents