Shark MV3010-FS manual Component Maintenance Schedule, To Clean the PRE-MOTOR Filters

Page 10

Vacuum Mode - cont.

 

 

COMPONENT

MAINTENANCE SCHEDULE

 

 

 

 

 

 

1

Dust Cup

Empty each time you vacuum.

 

 

 

 

 

 

2

Pre-Motor Foam Filters

Rinse and air dry every month under normal use.

 

 

 

 

 

 

3

Post-Motor HEPA Filter

Clean once every 12 months under normal use.

 

NOTE: The material in the filters will discolor over time. This is NORMAL and will not affect the performance of the filters.

DO NOT operate the vacuum without ALL the filters in place.

DO NOT operate the vacuum with WET filters.

Always unplug the vacuum from the electrical outlet before doing any maintenance on the appliance.

Pre-Motor Filters

Thick Foam

Thin Foam

Fig. 15

Fig. 16

TO CLEAN THE PRE-MOTOR FILTERS

1Press the dust cup release button on the top of the unit. Pull the dust cup out of the unit by pulling forward on the handle.

2Remove the two foam filters from the unit.

(Fig. 15)

3Thoroughly rinse the two filters in lukewarm water. Squeeze out any excess water. (Fig. 16) Air dry for 24 hours before reusing.

DO NOT use a hair dryer or any other forced hot air to dry the filter.

4Insert a dry filter set into the unit. The order of the filters impacts your dust cup performance. Make sure the thick filter is on the top and the thin filter is on the bottom.

Post Motor Filter

Hepa Filter

Fig. 18

Fig. 17

Fig. 19

TO CLEAN THE POST-MOTOR HEPA FILTER

1To release the vacuum nozzle, press the top “nozzle release” button first and then lift up on the main body. (Fig. 17)

2Lift the HEPA filter out from the vacuum nozzle.

(Fig. 18)

3Thoroughly rinse the filter in lukewarm water. (Fig. 19) Air dry for 24 hours before reusing.

DO NOT use a hair dryer or any other forced hot air to dry the filter.

4Once it is thoroughly dry, replace the HEPA filter into the vacuum nozzle.

NOTE: Any other servicing should be performed by an authorized service representative.

6

TOLL FREE: 1-800-798-7398

MV3010_40_ENG_IB_120713_2.indd 6

12-07-13 1:36 PM

Page 9 Page 11
Image 10
Page 9 Page 11
Contents MV3010 Important Safety Instructions Use only as described in this manualAttempt to Defeat This Safety Feature Do not run the cleaning unit over large- sized objectsPolarized Plug This Book Covers Model Number Technical SpecificationsSteam Technology MV3010Contents Vacuum Mode Getting StartedAssembly Vacuum Mode AssemblyAttaching the Vacuum Nozzle Using the Accessories Vacuum ModeUsing Vacuum Mode To return to standby mode, step on the pedal once moreEmptying the Dust CUP Never OVER-FILL the Dust CUPEmptying the Dust Screen To Clean the POST-MOTOR Hepa Filter Component Maintenance ScheduleTo Clean the PRE-MOTOR Filters Remove the two foam filters from the unitTo Reset the Motor Thermostat Vacuum Mode StorageCleaning the Vacuum Nozzle Checking for BlockagesAssembly Steam Mode Steam Mode AssemblyChanging to Steam Mode Filling the Water TankSteam Mode Using Steam ModeStone Sanitize floors Laminate Light cleaning and dustingMarble Remove spots and smaller messes Tile Tile Messes and stainsCare of Your MULTI-PURPOSE Cleaning PAD Steam Mode StorageTilt the cleaning unit back to the upright position StorageTroubleshooting Guide Vac-OR-Steamwill notPart Ordering PartsFoam & Hepa Filters XFF3010 Multi-Purpose Steam Pad Toll Free EURO-PRO Three 3 Years Limited Warranty Product RegistrationCan

MV3010-FS specifications

The Shark MV3010-FS is a powerful and innovative cleaning solution designed to tackle a variety of household messes with efficiency and ease. Engineered with state-of-the-art technology, this versatile vacuum cleaner stands out for its user-friendly features and exceptional performance.

One of the standout characteristics of the Shark MV3010-FS is its lightweight design. Weighing in at only 12 pounds, this vacuum is easy to maneuver, making it ideal for users of all ages. The upright format allows for easy navigation across different floor types, from carpets to hardwood, without the hassle of cumbersome equipment. Its compact size also ensures storage simplicity, fitting seamlessly into closets or small spaces.

The Shark MV3010-FS employs advanced DuoClean technology, which synergizes two brush rolls to deliver thorough cleaning on both carpets and hard floors. The front brush roll loosens large particles while the soft brush roll pulls in dust and finer debris, ensuring no mess is left behind. This dual cleaning feature minimizes the effort needed to switch between floor types, streamlining the cleaning process.

Another notable technology integrated into the Shark MV3010-FS is the Anti-Allergen Complete Seal Technology, which works in tandem with a HEPA filter to capture and trap 99.9% of dust and allergens. This is particularly beneficial for allergy sufferers or households with pets, as it ensures that allergens are not recirculated into the air while cleaning.

The vacuum includes an array of versatile attachments, such as a crevice tool and dusting brush, which enable users to clean nooks, crannies, and delicate surfaces with ease. Additionally, the 30-foot power cord provides an extended reach, allowing for uninterrupted cleaning of larger areas without the need for frequent outlet changes.

Convenience is further enhanced with features like the easy-to-empty dust cup, which reduces mess during disposal. The powerful suction, combined with intuitive controls, allows users to switch from floor to above-floor cleaning quickly, making the Shark MV3010-FS an all-in-one solution.

In conclusion, the Shark MV3010-FS is a standout vacuum offering a blend of lightweight maneuverability, advanced cleaning technologies, and practical features. It is designed to meet the demands of modern households, providing an efficient and effective cleaning experience that doesn’t compromise on quality or user comfort.
Top Page Image Contents