Shark MV3010-FS manual Vacuum Mode Storage, Checking for Blockages, Cleaning the Vacuum Nozzle

Page 11

Occasionally the vacuum may become blocked by a build up of debris and the Blockage Indicator light will illuminate. It is important to locate where the blockage is and carefully remove it without causing damage to yourself, the unit or anything else. Perform the following steps to try to find the blockage.

Beware of sharp objects when clearing blockages.

Damages caused while clearing or attempting to clear blockages are not covered under your product’s limited warranty.

Replace parts securely before using again.

Blockages may cause your vacuum to overheat and shut down. If so, clear the blockages, then follow the instructions for Resetting the Motor Thermostat.

Air Intake

Fig. 21

Fig. 20

CHECKING FOR BLOCKAGES

Dust Cup Air Duct:

1Remove Dust Cup Assembly and empty Dust Cup if necessary.

2Check Air Duct behind Dust Cup for clogs; clear before replacing Dust Cup Assembly. (Fig. 20)

CLEANING THE VACUUM NOZZLE:

The rotating brush in the vacuum nozzle must be free of debris for effective cleaning and maximum suction.

1Disconnect the vacuum nozzle and turn it over to inspect the bottom. If a build-up of debris is wound around the rotating brush, remove by carefully cutting with scissors. Avoid damaging or cutting the bristles. (Fig. 21)

MV3010_40_ENG_IB_120713_2.indd 7

Vacuum Mode: Storage

Fig. 22

Fig. 23

1Tilt the cleaning unit back into upright position.

2Tap the foot pedal until the unit returns to standby mode. The carpet light (on the left hand side of the nozzle) should be blinking blue. (Fig. 22)

3Unplug the unit.

4Wrap cord around cord holders and secure plug. Store cleaning unit in an upright position. (Fig. 23)

TO RESET THE MOTOR THERMOSTAT:

1Step on the foot pedal until it goes to standby mode.

2Unplug the vacuum.

3Empty the dust cup and clean filters.

4Check for blockages in hose, accessories and inlet openings.

5Allow the unit to cool for a minimum of 45 minutes.

Note: If vacuum still does not start, contact Customer Service

at: 1-800-798-7398.

www.sharkclean.com

7

12-07-13 1:36 PM

Page 10 Page 12
Image 11
Page 10 Page 12
Contents MV3010 Use only as described in this manual Important Safety InstructionsPolarized Plug Do not run the cleaning unit over large- sized objectsAttempt to Defeat This Safety Feature MV3010 Technical SpecificationsSteam Technology This Book Covers Model NumberContents Getting Started Vacuum ModeAttaching the Vacuum Nozzle Vacuum Mode AssemblyAssembly To return to standby mode, step on the pedal once more Vacuum ModeUsing Vacuum Mode Using the AccessoriesEmptying the Dust Screen Never OVER-FILL the Dust CUPEmptying the Dust CUP Remove the two foam filters from the unit Component Maintenance ScheduleTo Clean the PRE-MOTOR Filters To Clean the POST-MOTOR Hepa FilterChecking for Blockages Vacuum Mode StorageCleaning the Vacuum Nozzle To Reset the Motor ThermostatFilling the Water Tank Steam Mode AssemblyChanging to Steam Mode Assembly Steam ModeUsing Steam Mode Steam ModeTile Messes and stains Laminate Light cleaning and dustingMarble Remove spots and smaller messes Tile Stone Sanitize floorsStorage Steam Mode StorageTilt the cleaning unit back to the upright position Care of Your MULTI-PURPOSE Cleaning PADVac-OR-Steamwill not Troubleshooting GuideFoam & Hepa Filters XFF3010 Multi-Purpose Steam Pad Ordering PartsPart Toll Free Product Registration EURO-PRO Three 3 Years Limited WarrantyCan

MV3010-FS specifications

The Shark MV3010-FS is a powerful and innovative cleaning solution designed to tackle a variety of household messes with efficiency and ease. Engineered with state-of-the-art technology, this versatile vacuum cleaner stands out for its user-friendly features and exceptional performance.

One of the standout characteristics of the Shark MV3010-FS is its lightweight design. Weighing in at only 12 pounds, this vacuum is easy to maneuver, making it ideal for users of all ages. The upright format allows for easy navigation across different floor types, from carpets to hardwood, without the hassle of cumbersome equipment. Its compact size also ensures storage simplicity, fitting seamlessly into closets or small spaces.

The Shark MV3010-FS employs advanced DuoClean technology, which synergizes two brush rolls to deliver thorough cleaning on both carpets and hard floors. The front brush roll loosens large particles while the soft brush roll pulls in dust and finer debris, ensuring no mess is left behind. This dual cleaning feature minimizes the effort needed to switch between floor types, streamlining the cleaning process.

Another notable technology integrated into the Shark MV3010-FS is the Anti-Allergen Complete Seal Technology, which works in tandem with a HEPA filter to capture and trap 99.9% of dust and allergens. This is particularly beneficial for allergy sufferers or households with pets, as it ensures that allergens are not recirculated into the air while cleaning.

The vacuum includes an array of versatile attachments, such as a crevice tool and dusting brush, which enable users to clean nooks, crannies, and delicate surfaces with ease. Additionally, the 30-foot power cord provides an extended reach, allowing for uninterrupted cleaning of larger areas without the need for frequent outlet changes.

Convenience is further enhanced with features like the easy-to-empty dust cup, which reduces mess during disposal. The powerful suction, combined with intuitive controls, allows users to switch from floor to above-floor cleaning quickly, making the Shark MV3010-FS an all-in-one solution.

In conclusion, the Shark MV3010-FS is a standout vacuum offering a blend of lightweight maneuverability, advanced cleaning technologies, and practical features. It is designed to meet the demands of modern households, providing an efficient and effective cleaning experience that doesn’t compromise on quality or user comfort.
Top Page Image Contents